A	B	C	D	E	F	G	H	I	J	K	L	M	N	O	P	Q
1
2
3
4
5	Please save this file to your own computer before filling out this reporting form.
6	Before completing this form please review the DEQ website for the most recent versions and instructions for this form:
7	https://www.oregon.gov/deq/aq/aqPermits/Pages/CAO-reg.aspx
8
9	All DEQ and Lane Regional Air Protection Agency permitted facilities, or facilities applying for Air Quality permits, will need to complete and submit this form as the first step in the Cleaner Air Oregon Air Toxics Program.
10
11
12	Please fill out the following worksheets to complete an air toxic emissions inventory for your facility:
13
14	Worksheet 1	Facility Information	Record facility name and address, contact person, source number, and number of employees in the boxes.
15	Worksheet 2	Emission Units & Activities	Record all Toxics Emissions Units and activities that emit air toxics included in the list of associated Air Toxic contaminants. Provide both annual and maximum daily production and process rates, emission type, and control devices/efficiency for each emissions unit.
16	Worksheet 3	Pollutant Emissions - EF	Record all Air Toxic pollutants CAS/DEQ ID and chemical names, pollutant-specifc emissions factors and control efficiencies, and calculated emissions.
17	Worksheet 4	Material Balance Activities	Record all emission units and activities that emit air toxics included in the list of associated air toxic contaminants. Provide annual and maximum daily material usage and waste activities, material names and manufacturer, and emission type.
18	Worksheet 5	Pollutant Emissions - MB	Record all Air Toxic pollutants CAS/DEQ ID and chemical names associated with recorded materials, pollutant-specifc percent composition and control efficiencies, and calculated emissions.
19
20	Note: Emissions information will be entered on Worksheets 2&3 for EF-based emissions, and Worksheets 4&5 for Material Balance-based emissions.
21
22
23	What you need (Existing Sources):
24	1. Current Permit and Permit Review Report
25	2. Emission Detail Sheets
26	3. Safety Data Sheets, Certified Product Data Sheets, Environmental Data Sheets, or any lab data for each material used.
27	4. Most Recent Annual Report[s]
28	5. Any other documentation needed to help fulfill request - e.g. emissions factor references, source test review reports, etc.
29
30	Worksheet 1: Facility Information
31
32	Please provide the facility name and address, contact person, and source number which is the first 6 digits of the permit number (existing sources) in the boxes provided.
33
34	Worksheet 2: Emission Units & Activities
35
36	1. List all Toxics Emissions Units (TEUs), Activity IDs and descriptions, and Control Devices for all emission units or activities that emit air toxics at the facility. Use emission unit or activity ID from permits and create new IDs as necessary. For Material Balance activities proceed to Worksheet 4.
37	2. Record emissions type (i.e. Stack or Fugitive) and corresponding emission type ID.
38	3. Describe activity units (e.g. MM ft3, gallons, tons, MMBTU, pounds, etc.) and type (e.g. natural gas, wood, metal poured, etc.) for each specific emissions unit/activty.
39
40	4. Record quantities, units of measurements, and types of Annual and Maximum Daily activity/production/process rates for each TEU/Activity for "Actual", "Requested PTE", and "Capacity" production scenarios.
41
42		Note: "Actual" is based on the reporting year (existing sources) or an estimate of typical production (new sources); "Requested PTE" is the level requested by the source, which may be
43		higher than "Actual" production values; and "Capacity" is based on the 100% uptime and production for the facility - this may be used for de Minimus screening.
44
45	Worksheet 3: Pollutant Emissions - EF
46
47	1. Provide a row for each Air Toxic emitted from a specified TEU. Either select a CAS number or DEQ ID from the dropdown list or cut and paste both the CAS/DEQ ID and Chemical Name for each pollutant.
48
49	2. Provide the Total Combined Control Efficiency for each pollutant from the specificied TEU - this value may be composed of multiple capture/transfer efficiencies and destruction/removal efficiencies. Note: These control efficiencies may differ for different pollutants from the same TEU.
50

51	3. Provide pollutant-specifc Emissions Factors (EF) for both Annual and Maximum Daily emissions (if different). Also provide the units for the EF values in pounds/activity units. Provide EF references (AP-42, WebFire, Source Tests, etc.) and any related notes (e.g. Control Efficiency references).
52
53	4. Calculate emissions using the following formula (Note: see the example calculations in red):
54		E = (P)*(EF)*(1-CE)
55		E	=	Annual or Maximum Daily air toxics emissions [Pounds/(Year|Day)]
56		P	=	Production or Process Usage Rate [Activity Units/(Year|Day)]
57		EF	=	Pollutant Emission Factor [Pounds/ Activity Unit]
58		CE	=	Overall Control Efficiency expressed as a decimal.
59
60	Worksheet 4: Material Balance Activities
61
62	1. List all TEU IDs and TEU/Activity descriptions with emissions from material balance activities. For Emission Factor-based activities proceed to Worksheet 2.
63
64	2. List all materials (e.g. paints, coating materials, thinners, solvents, etc.) containing pollutants from the provided Air Toxics list - include product name and manufacturer for each specified TEU/Activity.
65
66	3. Record emissions type (i.e. Stack or Fugitive) and corresponding emission type ID.
67
68	4. Record "Material Usage" quantities in pounds for both annual and maximum daily activity/production/process rates for each TEU/activity for "Actual", "Requested PTE", and "Capacity" production scenarios.
69
70		Note: "Actual" is based on the reporting year (existing sources) or an estimate of typical production (new sources); "Requested PTE" is the level requested by the source, which may be
71		higher than "Actual" production values; and "Capacity" is based on the 100% uptime and production for the facility - this may be used for de Minimus screening.
72
73	5. Record "Material Wasted" quantities in pounds for both annual and maximum daily activity/production/process rates for each TEU/activity for "Actual", "Requested PTE", and "Capacity" production scenarios.
74
75		Note: "Material Wasted" may consist of waste collected and shipped off-site, materials that drain as liquid to a collection/treatment system, material that may be retained in the product,
76		or any material that should beexcluded from emissions calculations.
77
78	Worksheet 5: Pollutant Emissions - MB
79
80	1. Provide a row for each Air Toxic emitted from a specified material and its associated TEU/Activity. Either select a CAS number or DEQ ID from the dropdown list or cut and paste both the CAS/DEQ ID and Chemical Name for each pollutant.
81
82	2. Provide the Total Combined Control Efficiency for each pollutant contained in a specified material - this value may be composed of multiple capture/transfer efficiencies and destruction/removal efficiencies. Note: These control efficiencies may differ for different pollutants from the same material and TEU/Activity.
83
84	3. Provide the percent composition for the Air Toxic in the specified material as provided by the manufacturer supplied data (e.g. SDS).
85		Note:
86		If percent weight is a range, use the mid-point of the range. (e.g., if range is 10-50% use 30%, or if the SDS lists < 5% use 2.5%)
87
88	4. Provide any notes or references relevant to the pollutant emissions - e.g. technical references, details of control efficiencies, etc.
89
90	5. Calculate emissions using the following formula (Note: see the example calculations in red):
91		E = [(CX–WX)*KX]*(1–CE)
92		E	=	Annual or Maximum Daily air toxic emissions [Pounds/(Year|Day)]
93		X	=	Subscript X represents a specific material
94		C	=	Material usage [Pounds/(Year|Day)]
95		W	=	Material waste [Pounds/(Year|Day)]
96		K	=	Percent weight air toxic pollutant concentration expressed as a decimal
97		CE	=	Control efficiency expressed as decimal

	A	B	C
1
2
3
4
5	Facility Information
6	Facility Name	Mutual Materials Company
7	Facility Address	2300 SE Hogan Road
8	City	Gresham
9	Zip Code	97080
10	Source Number (for existing sources)	26-0088
11	Facility Contact	James C. Smith
12	Phone Number	253-495-2719

	A	B	C	D	E	F	G	H	I	J	K	L	M
1
2
3
4
5
6
7
8
9
10	Emissions Unit Information			Stack/Fugitive Information		Activity Information
11	Toxics Emissions Unit ID	Unit Description	Control Device[s]	Emission Type (e.g. Point or Fugitive)	Stack or Fugitive ID	Units (e.g. hours operation, tons material, gallons)	Description/Type	Annual - Chronic [units/year]			Max Daily - Acute [units/day]
12								Actual	Requested PTE	Capacity	Actual	Requested PTE	Capacity
13	TEU-1	Widget Maker 1 (EXAMPLE)	Widget Waste RCO	Point	ST-1	tons	Input Material X	100	140	200	0.3	0.5	0.8
14
15	KILN_TK	Tunnel kiln drying clay bricks without manganese treatment	None	Point	KILN, DRY_1, DRY_2, DRY_3	tons	fired brick	8963.68	10350	--	61	0	65
16	KILN_TKM	Tunnel kiln drying clay bricks with manganese treatment	None	Point	KILN, DRY_1, DRY_2, DRY_3	tons	fired brick	10396.32	12150	--	61	65	65
17	KILN_M	Tunnel kiln emissions from Manga K	None	Point	KILN, DRY_1, DRY_2, DRY_3	lb	product	263459	306189	--	6000	6000	6000
18	KILN_BX	Tunnel kiln emissions from Brickox	None	Point	KILN, DRY_1, DRY_2, DRY_3	lb	product	172043	199947	--	4000	4000	4000
19	KILN_CC	Tunnel kiln emissions from Calcium Carbonate(lime flour)	None	Point	KILN, DRY_1, DRY_2, DRY_3	lb	product	13600	15806	--	58	58	58
20	KILN_GB	Tunnel kiln emissions from Gerstley Borate	None	Point	KILN, DRY_1, DRY_2, DRY_3	lb	product	200	232	--	10	10	10
21	KILN_RC	Tunnel kiln emissions from Cedar hts redart clay	None	Point	KILN, DRY_1, DRY_2, DRY_3	lb	product	5250	6101	--	23	23	23
22	KILN_IO	Tunnel kiln emissions from Iron Oxide 521	None	Point	KILN, DRY_1, DRY_2, DRY_3	lb	product	2550	2964	--	300	300	300
23	KILN_IONR	Tunnel kiln emissions from Syn.Iron Oxide NR 4284	None	Point	KILN, DRY_1, DRY_2, DRY_3	lb	product	2850	3312	--	13	13	13
24	KILN_BT	Tunnel kiln emissions from Bentonite	None	Point	KILN, DRY_1, DRY_2, DRY_3	lb	product	200	232	--	4	4	4
25	SILO_1	Silo 1 Sand/Gravel	Dust collection filters	Point	SILO_1	ton	product	4130.5	5500	--	17.6	17.6	17.6
26	SILO_2	Silo 2 Sand/Gravel	Dust collection filters	Point	SILO_2	ton	product	4130.5	5500	--	17.6	17.6	17.6
27	SILO_3	Silo 3 Sand/Gravel	Dust collection filters	Point	SILO_3	ton	product	4130.5	5500	--	17.6	17.6	17.6
28	SILO_4	Silo 4 Sand/Gravel	Dust collection filters	Point	SILO_4	ton	product	4130.5	5500	--	17.6	17.6	17.6
29	SILO_5	Silo 5 Sand/Gravel	Dust collection filters	Point	SILO_5	ton	product	4130.5	5500	--	17.6	17.6	17.6
30	SILO_6	Silo 6 Sand/Gravel	Dust collection filters	Point	SILO_6	ton	product	4130.5	5500	--	17.6	17.6	17.6
31	SILO_7	Silo 7 Sand/Gravel	Dust collection filters	Point	SILO_7	ton	product	4130.5	5500	--	17.6	17.6	17.6
32	SILO_8	Silo 8 Sand/Gravel	Dust collection filters	Point	SILO_8	ton	product	4130.5	5500	--	17.6	17.6	17.6
33	SILO_9	Silo 9 Sand/Gravel	Dust collection filters	Point	SILO_9	ton	product	4130.5	5500	--	17.6	17.6	17.6
34	SILO_10	Silo 10 Sand/Gravel	Dust collection filters	Point	SILO_10	ton	product	4130.5	5500	--	17.6	17.6	17.6
35	NG	Natural Gas Combustion	None	Point	KILN, DRY_1, DRY_2, DRY_3	MMscf	natural gas	97.27290448	102.45614035	--	0.28070175	0.28070175	0.28070175

	A	B	C	D	E	F	G	H	I	J	K	L	M	N	O
1
2
3
4
5
6
7
8
9										Calculated Emissions
10	Toxic Emissions Unit ID	Pollutant Information			Control Efficiency	Emission Factor Information				Annual - Chronic [lb/yr]			Max Daily - Acute [lb/day]
11						EF Values		Units	Reference/Notes
12		CAS or DEQ ID	Chemical Name			Annual - Chronic	Max Daily - Acute			Actual	Requested PTE	Capacity	Actual	Requested PTE	Capacity
13	TEU-1	61-82-5	Amitrole		97.50%	2.5		lb/ton	Annual and max daily EF values are the same for this TEU and its pollutants	6.25	8.75	12.5	0.01875	0.03125	0.05
14	TEU-1	7440-38-2	Arsenic and compounds		0.00%	0.1		lb/ton	The control efficiency does not apply to this pollutant	10	14	20	0.03	0.05	0.08
15
16	KILN_TK	7440-36-0	Antimony and compounds		0.00%	0.000027	0.000027	lb/ton fired brick	AP-42 Chapter 11.3 (August, 1997), Table 11.3-7, Emission Factors for Metals Emissions from Brick Manufacturing Operations, natural gas-fired kiln. 100 percent of daily production has been calculated as fired tons with manganese surface treatment to present the most conservative acute risk scenario.	--	0.27945	--	--	0	--
17	KILN_TK	7440-38-2	Arsenic and compounds		0.00%	0.000031	0.000031	lb/ton fired brick	AP-42 Chapter 11.3 (August, 1997), Table 11.3-7, Emission Factors for Metals Emissions from Brick Manufacturing Operations, natural gas-fired kiln. 100 percent of daily production has been calculated as fired tons with manganese surface treatment to present the most conservative acute risk scenario.	--	0.32085	--	--	0	--
18	KILN_TK	7440-41-7	Beryllium and compounds		0.00%	0.00000042	0.00000042	lb/ton fired brick	AP-42 Chapter 11.3 (August, 1997), Table 11.3-7, Emission Factors for Metals Emissions from Brick Manufacturing Operations, natural gas-fired kiln. 100 percent of daily production has been calculated as fired tons with manganese surface treatment to present the most conservative acute risk scenario.	--	0.004347	--	--	0	--
19	KILN_TK	7440-43-9	Cadmium and compounds		0.00%	0.000015	0.000015	lb/ton fired brick	AP-42 Chapter 11.3 (August, 1997), Table 11.3-7, Emission Factors for Metals Emissions from Brick Manufacturing Operations, natural gas-fired kiln. 100 percent of daily production has been calculated as fired tons with manganese surface treatment to present the most conservative acute risk scenario.	--	0.15525	--	--	0	--
20	KILN_TK	18540-29-9	Chromium VI, chromate and dichromate particulate		0.00%	0.000051	0.000051	lb/ton fired brick	AP-42 Chapter 11.3 (August, 1997), Table 11.3-7, Emission Factors for Metals Emissions from Brick Manufacturing Operations, natural gas-fired kiln. Conservatively assumes 100 percent of total chromium is converted to hexavalent chromium. 100 percent of daily production has been calculated as fired tons with manganese surface treatment to present the most conservative acute risk scenario.	--	0.52785	--	--	0	--
21	KILN_TK	7440-48-4	Cobalt and compounds		0.00%	0.0000021	0.0000021	lb/ton fired brick	AP-42 Chapter 11.3 (August, 1997), Table 11.3-7, Emission Factors for Metals Emissions from Brick Manufacturing Operations, natural gas-fired kiln. 100 percent of daily production has been calculated as fired tons with manganese surface treatment to present the most conservative acute risk scenario.	--	0.021735	--	--	0	--
22	KILN_TK	7439-92-1	Lead and compounds		0.00%	0.00015	0.00015	lb/ton fired brick	AP-42 Chapter 11.3 (August, 1997), Table 11.3-7, Emission Factors for Metals Emissions from Brick Manufacturing Operations, natural gas-fired kiln. 100 percent of daily production has been calculated as fired tons with manganese surface treatment to present the most conservative acute risk scenario.	--	1.5525	--	--	0	--
23	KILN_TK	7439-96-5	Manganese and compounds		0.00%	0.00029	0.00029	lb/ton fired brick	AP-42 Chapter 11.3 (August, 1997), Table 11.3-7, Emission Factors for Metals Emissions from Brick Manufacturing Operations, natural gas-fired kiln. 100 percent of daily production has been calculated as fired tons with manganese surface treatment to present the most conservative acute risk scenario.	--	3.0015	--	--	0	--
24	KILN_TK	7439-97-6	Mercury and compounds		0.00%	0.0000075	0.0000075	lb/ton fired brick	AP-42 Chapter 11.3 (August, 1997), Table 11.3-7, Emission Factors for Metals Emissions from Brick Manufacturing Operations, natural gas-fired kiln. 100 percent of daily production has been calculated as fired tons with manganese surface treatment to present the most conservative acute risk scenario.	--	0.077625	--	--	0	--
25	KILN_TK	7440-02-0	Nickel and compounds		0.00%	0.000072	0.000072	lb/ton fired brick	AP-42 Chapter 11.3 (August, 1997), Table 11.3-7, Emission Factors for Metals Emissions from Brick Manufacturing Operations, natural gas-fired kiln. 100 percent of daily production has been calculated as fired tons with manganese surface treatment to present the most conservative acute risk scenario.	--	0.7452	--	--	0	--
26	KILN_TK	7782-49-2	Selenium and compounds		0.00%	0.00023	0.00023	lb/ton fired brick	AP-42 Chapter 11.3 (August, 1997), Table 11.3-7, Emission Factors for Metals Emissions from Brick Manufacturing Operations, natural gas-fired kiln. 100 percent of daily production has been calculated as fired tons with manganese surface treatment to present the most conservative acute risk scenario.	--	2.3805	--	--	0	--
27	KILN_TK	67-64-1	Acetone		0.00%	0.0017	0.0017	lb/ton fired brick	AP-42 Chapter 11.3 (August, 1997), Table 11.3-6, Emission Factors for Organic Pollutant Emissions from Brick Manufacturing Operations, natural gas-fired kiln. 100 percent of daily production has been calculated as fired tons with manganese surface treatment to present the most conservative acute risk scenario.	--	17.595	--	--	0	--
28	KILN_TK	71-43-2	Benzene		0.00%	0.0029	0.0029	lb/ton fired brick	AP-42 Chapter 11.3 (August, 1997), Table 11.3-6, Emission Factors for Organic Pollutant Emissions from Brick Manufacturing Operations, natural gas-fired kiln. 100 percent of daily production has been calculated as fired tons with manganese surface treatment to present the most conservative acute risk scenario.	--	30.015	--	--	0	--
29	KILN_TK	75-15-0	Carbon disulfide		0.00%	0.000043	0.000043	lb/ton fired brick	AP-42 Chapter 11.3 (August, 1997), Table 11.3-6, Emission Factors for Organic Pollutant Emissions from Brick Manufacturing Operations, natural gas-fired kiln. 100 percent of daily production has been calculated as fired tons with manganese surface treatment to present the most conservative acute risk scenario.	--	0.44505	--	--	0	--
30	KILN_TK	100-41-4	Ethyl benzene		0.00%	0.000044	0.000044	lb/ton fired brick	AP-42 Chapter 11.3 (August, 1997), Table 11.3-6, Emission Factors for Organic Pollutant Emissions from Brick Manufacturing Operations, natural gas-fired kiln. 100 percent of daily production has been calculated as fired tons with manganese surface treatment to present the most conservative acute risk scenario.	--	0.4554	--	--	0	--
31	KILN_TK	75-00-3	Chloroethane (ethyl chloride)		0.00%	0.00057	0.00057	lb/ton fired brick	AP-42 Chapter 11.3 (August, 1997), Table 11.3-6, Emission Factors for Organic Pollutant Emissions from Brick Manufacturing Operations, natural gas-fired kiln. 100 percent of daily production has been calculated as fired tons with manganese surface treatment to present the most conservative acute risk scenario.	--	5.8995	--	--	0	--
32	KILN_TK	74-87-3	Chloromethane (methyl chloride)		0.00%	0.00067	0.00067	lb/ton fired brick	AP-42 Chapter 11.3 (August, 1997), Table 11.3-6, Emission Factors for Organic Pollutant Emissions from Brick Manufacturing Operations, natural gas-fired kiln. 100 percent of daily production has been calculated as fired tons with manganese surface treatment to present the most conservative acute risk scenario.	--	6.9345	--	--	0	--
33	KILN_TK	71-55-6	1,1,1-Trichloroethane (methyl chloroform)		0.00%	0.0000047	0.0000047	lb/ton fired brick	AP-42 Chapter 11.3 (August, 1997), Table 11.3-6, Emission Factors for Organic Pollutant Emissions from Brick Manufacturing Operations, natural gas-fired kiln. 100 percent of daily production has been calculated as fired tons with manganese surface treatment to present the most conservative acute risk scenario.	--	0.048645	--	--	0	--
34	KILN_TK	78-93-3	2-Butanone (methyl ethyl ketone)		0.00%	0.00022	0.00022	lb/ton fired brick	AP-42 Chapter 11.3 (August, 1997), Table 11.3-6, Emission Factors for Organic Pollutant Emissions from Brick Manufacturing Operations, natural gas-fired kiln. 100 percent of daily production has been calculated as fired tons with manganese surface treatment to present the most conservative acute risk scenario.	--	2.277	--	--	0	--
35	KILN_TK	74-88-4	Methyl iodide (iodomethane)		0.00%	0.000093	0.000093	lb/ton fired brick	AP-42 Chapter 11.3 (August, 1997), Table 11.3-6, Emission Factors for Organic Pollutant Emissions from Brick Manufacturing Operations, natural gas-fired kiln. 100 percent of daily production has been calculated as fired tons with manganese surface treatment to present the most conservative acute risk scenario.	--	0.96255	--	--	0	--
36	KILN_TK	100-42-5	Styrene		0.00%	0.00002	0.00002	lb/ton fired brick	AP-42 Chapter 11.3 (August, 1997), Table 11.3-6, Emission Factors for Organic Pollutant Emissions from Brick Manufacturing Operations, natural gas-fired kiln. 100 percent of daily production has been calculated as fired tons with manganese surface treatment to present the most conservative acute risk scenario.	--	0.207	--	--	0	--
37	KILN_TK	127-18-4	Tetrachloroethene (perchloroethylene)		0.00%	0.0000028	0.0000028	lb/ton fired brick	AP-42 Chapter 11.3 (August, 1997), Table 11.3-6, Emission Factors for Organic Pollutant Emissions from Brick Manufacturing Operations, natural gas-fired kiln. 100 percent of daily production has been calculated as fired tons with manganese surface treatment to present the most conservative acute risk scenario.	--	0.02898	--	--	0	--
38	KILN_TK	108-88-3	Toluene		0.00%	0.00016	0.00016	lb/ton fired brick	AP-42 Chapter 11.3 (August, 1997), Table 11.3-6, Emission Factors for Organic Pollutant Emissions from Brick Manufacturing Operations, natural gas-fired kiln. 100 percent of daily production has been calculated as fired tons with manganese surface treatment to present the most conservative acute risk scenario.	--	1.656	--	--	0	--
39	KILN_TK	1330-20-7	Xylene (mixture), including m-xylene, o-xylene, p-xylene		0.00%	0.000067	0.000067	lb/ton fired brick	AP-42 Chapter 11.3 (August, 1997), Table 11.3-6, Emission Factors for Organic Pollutant Emissions from Brick Manufacturing Operations, natural gas-fired kiln. 100 percent of daily production has been calculated as fired tons with manganese surface treatment to present the most conservative acute risk scenario.	--	0.69345	--	--	0	--
40	KILN_TK	95-47-6	o-Xylene		0.00%	0.000058	0.000058	lb/ton fired brick	AP-42 Chapter 11.3 (August, 1997), Table 11.3-6, Emission Factors for Organic Pollutant Emissions from Brick Manufacturing Operations, natural gas-fired kiln. 100 percent of daily production has been calculated as fired tons with manganese surface treatment to present the most conservative acute risk scenario.	--	0.6003	--	--	0	--
41	KILN_TK	7782-50-5	Chlorine		0.00%	0.0013	0.0013	lb/ton fired brick	AP-42 Chapter 11.3 (August, 1997), Table 11.3-6, Emission Factors for Organic Pollutant Emissions from Brick Manufacturing Operations, natural gas-fired kiln. 100 percent of daily production has been calculated as fired tons with manganese surface treatment to present the most conservative acute risk scenario.	--	13.455	--	--	0	--
42	KILN_TK	7664-39-3	Hydrogen fluoride		0.00%	0.76	0.76	lb/ton fired brick	Source Evaluation Report, Horizon Engineering, July 31, 2014. 100 percent of daily production has been calculated as fired tons with manganese surface treatment to present the most conservative acute risk scenario.	--	7866	--	--	0	--
43	KILN_TK	7647-01-0	Hydrochloric acid		0.00%	0.17	0.17	lb/ton fired brick	AP-42 Chapter 11.3 (August, 1997), Table 11.3-4, Emission Factors for Hydrogen Fluoride, Total Fluorides, and Hydrogen Chloride from Manufacturing Operations, uncontrolled natural gas-fired tunnel kiln. 100 percent of daily production has been calculated as fired tons with manganese surface treatment to present the most conservative acute risk scenario.	--	1759.5	--	--	0	--
44	KILN_TK	106-46-7	p-Dichlorobenzene (1,4-dichlorobenzene)		0.00%	0.000048	0.000048	lb/ton fired brick	AP-42 Chapter 11.3 (August, 1997), Table 11.3-6, Emission Factors for Organic Pollutant Emissions from Brick Manufacturing Operations, natural gas-fired kiln. 100 percent of daily production has been calculated as fired tons with manganese surface treatment to present the most conservative acute risk scenario.	--	0.4968	--	--	0	--
45	KILN_TK	91-57-6	2-Methyl naphthalene		0.00%	0.000057	0.000057	lb/ton fired brick	AP-42 Chapter 11.3 (August, 1997), Table 11.3-6, Emission Factors for Organic Pollutant Emissions from Brick Manufacturing Operations, natural gas-fired kiln. 100 percent of daily production has been calculated as fired tons with manganese surface treatment to present the most conservative acute risk scenario.	--	0.58995	--	--	0	--
46	KILN_TK	91-20-3	Naphthalene		0.00%	0.000065	0.000065	lb/ton fired brick	AP-42 Chapter 11.3 (August, 1997), Table 11.3-6, Emission Factors for Organic Pollutant Emissions from Brick Manufacturing Operations, natural gas-fired kiln. 100 percent of daily production has been calculated as fired tons with manganese surface treatment to present the most conservative acute risk scenario.	--	0.67275	--	--	0	--
47	KILN_TK	108-95-2	Phenol		0.00%	0.000086	0.000086	lb/ton fired brick	AP-42 Chapter 11.3 (August, 1997), Table 11.3-6, Emission Factors for Organic Pollutant Emissions from Brick Manufacturing Operations, natural gas-fired kiln. 100 percent of daily production has been calculated as fired tons with manganese surface treatment to present the most conservative acute risk scenario.	--	0.8901	--	--	0	--
48	KILN_TK	85-68-7	Butyl benzyl phthalate		0.00%	0.000018	0.000018	lb/ton fired brick	AP-42 Chapter 11.3 (August, 1997), Table 11.3-6, Emission Factors for Organic Pollutant Emissions from Brick Manufacturing Operations, natural gas-fired kiln. 100 percent of daily production has been calculated as fired tons with manganese surface treatment to present the most conservative acute risk scenario.	--	0.1863	--	--	0	--
49	KILN_TK	84-74-2	Dibutyl phthalate		0.00%	0.00014	0.00014	lb/ton fired brick	AP-42 Chapter 11.3 (August, 1997), Table 11.3-6, Emission Factors for Organic Pollutant Emissions from Brick Manufacturing Operations, natural gas-fired kiln. 100 percent of daily production has been calculated as fired tons with manganese surface treatment to present the most conservative acute risk scenario.	--	1.449	--	--	0	--
50	KILN_TK	117-81-7	bis(2-Ethylhexyl) phthalate (DEHP)		0.00%	0.002	0.002	lb/ton fired brick	AP-42 Chapter 11.3 (August, 1997), Table 11.3-6, Emission Factors for Organic Pollutant Emissions from Brick Manufacturing Operations, natural gas-fired kiln. 100 percent of daily production has been calculated as fired tons with manganese surface treatment to present the most conservative acute risk scenario.	--	20.7	--	--	0	--

51	KILN_TK	84-66-2	Diethylphthalate		0.00%	0.00024	0.00024	lb/ton fired brick	AP-42 Chapter 11.3 (August, 1997), Table 11.3-6, Emission Factors for Organic Pollutant Emissions from Brick Manufacturing Operations, natural gas-fired kiln. 100 percent of daily production has been calculated as fired tons with manganese surface treatment to present the most conservative acute risk scenario.	--	2.484	--	--	0	--
52	KILN_TKM	7440-36-0	Antimony and compounds		0.00%	0.000027	0.000027	lb/ton fired brick	AP-42 Chapter 11.3 (August, 1997), Table 11.3-7, Emission Factors for Metals Emissions from Brick Manufacturing Operations, natural gas-fired kiln.	--	0.32805	--	--	0.001755	--
53	KILN_TKM	7440-38-2	Arsenic and compounds		0.00%	0.000031	0.000031	lb/ton fired brick	AP-42 Chapter 11.3 (August, 1997), Table 11.3-7, Emission Factors for Metals Emissions from Brick Manufacturing Operations, natural gas-fired kiln.	--	0.37665	--	--	0.002015	--
54	KILN_TKM	7440-41-7	Beryllium and compounds		0.00%	0.00000042	0.00000042	lb/ton fired brick	AP-42 Chapter 11.3 (August, 1997), Table 11.3-7, Emission Factors for Metals Emissions from Brick Manufacturing Operations, natural gas-fired kiln.	--	0.005103	--	--	0.0000273	--
55	KILN_TKM	7440-43-9	Cadmium and compounds		0.00%	0.000015	0.000015	lb/ton fired brick	AP-42 Chapter 11.3 (August, 1997), Table 11.3-7, Emission Factors for Metals Emissions from Brick Manufacturing Operations, natural gas-fired kiln.	--	0.18225	--	--	0.000975	--
56	KILN_TKM	18540-29-9	Chromium VI, chromate and dichromate particulate		0.00%	0.000051	0.000051	lb/ton fired brick	AP-42 Chapter 11.3 (August, 1997), Table 11.3-7, Emission Factors for Metals Emissions from Brick Manufacturing Operations, natural gas-fired kiln. Conservatively assumes 100 percent of total chromium is converted to hexavalent chromium.	--	0.61965	--	--	0.003315	--
57	KILN_TKM	7440-48-4	Cobalt and compounds		0.00%	0.0000021	0.0000021	lb/ton fired brick	AP-42 Chapter 11.3 (August, 1997), Table 11.3-7, Emission Factors for Metals Emissions from Brick Manufacturing Operations, natural gas-fired kiln.	--	0.025515	--	--	0.0001365	--
58	KILN_TKM	7439-92-1	Lead and compounds		0.00%	0.00015	0.00015	lb/ton fired brick	AP-42 Chapter 11.3 (August, 1997), Table 11.3-7, Emission Factors for Metals Emissions from Brick Manufacturing Operations, natural gas-fired kiln.	--	1.8225	--	--	0.00975	--
59	KILN_TKM	7439-96-5	Manganese and compounds		0.00%	0.013	0.013	lb/ton fired brick	AP-42 Chapter 11.3 (August, 1997), Table 11.3-7, Emission Factors for Metals Emissions from Brick Manufacturing Operations. Assumes value for sawdust-fired kiln with manganese treatment.	--	157.95	--	--	0.845	--
60	KILN_TKM	7439-97-6	Mercury and compounds		0.00%	0.0000075	0.0000075	lb/ton fired brick	AP-42 Chapter 11.3 (August, 1997), Table 11.3-7, Emission Factors for Metals Emissions from Brick Manufacturing Operations, natural gas-fired kiln.	--	0.091125	--	--	0.0004875	--
61	KILN_TKM	7440-02-0	Nickel and compounds		0.00%	0.000072	0.000072	lb/ton fired brick	AP-42 Chapter 11.3 (August, 1997), Table 11.3-7, Emission Factors for Metals Emissions from Brick Manufacturing Operations, natural gas-fired kiln.	--	0.8748	--	--	0.00468	--
62	KILN_TKM	7782-49-2	Selenium and compounds		0.00%	0.00023	0.00023	lb/ton fired brick	AP-42 Chapter 11.3 (August, 1997), Table 11.3-7, Emission Factors for Metals Emissions from Brick Manufacturing Operations, natural gas-fired kiln.	--	2.7945	--	--	0.01495	--
63	KILN_TKM	67-64-1	Acetone		0.00%	0.0017	0.0017	lb/ton fired brick	AP-42 Chapter 11.3 (August, 1997), Table 11.3-6, Emission Factors for Organic Pollutant Emissions from Brick Manufacturing Operations, natural gas-fired kiln.	--	20.655	--	--	0.1105	--
64	KILN_TKM	71-43-2	Benzene		0.00%	0.0029	0.0029	lb/ton fired brick	AP-42 Chapter 11.3 (August, 1997), Table 11.3-6, Emission Factors for Organic Pollutant Emissions from Brick Manufacturing Operations, natural gas-fired kiln.	--	35.235	--	--	0.1885	--
65	KILN_TKM	75-15-0	Carbon disulfide		0.00%	0.000043	0.000043	lb/ton fired brick	AP-42 Chapter 11.3 (August, 1997), Table 11.3-6, Emission Factors for Organic Pollutant Emissions from Brick Manufacturing Operations, natural gas-fired kiln.	--	0.52245	--	--	0.002795	--
66	KILN_TKM	100-41-4	Ethyl benzene		0.00%	0.000044	0.000044	lb/ton fired brick	AP-42 Chapter 11.3 (August, 1997), Table 11.3-6, Emission Factors for Organic Pollutant Emissions from Brick Manufacturing Operations, natural gas-fired kiln.	--	0.5346	--	--	0.00286	--
67	KILN_TKM	75-00-3	Chloroethane (ethyl chloride)		0.00%	0.00057	0.00057	lb/ton fired brick	AP-42 Chapter 11.3 (August, 1997), Table 11.3-6, Emission Factors for Organic Pollutant Emissions from Brick Manufacturing Operations, natural gas-fired kiln.	--	6.9255	--	--	0.03705	--
68	KILN_TKM	74-87-3	Chloromethane (methyl chloride)		0.00%	0.00067	0.00067	lb/ton fired brick	AP-42 Chapter 11.3 (August, 1997), Table 11.3-6, Emission Factors for Organic Pollutant Emissions from Brick Manufacturing Operations, natural gas-fired kiln.	--	8.1405	--	--	0.04355	--
69	KILN_TKM	71-55-6	1,1,1-Trichloroethane (methyl chloroform)		0.00%	0.0000047	0.0000047	lb/ton fired brick	AP-42 Chapter 11.3 (August, 1997), Table 11.3-6, Emission Factors for Organic Pollutant Emissions from Brick Manufacturing Operations, natural gas-fired kiln.	--	0.057105	--	--	0.0003055	--
70	KILN_TKM	78-93-3	2-Butanone (methyl ethyl ketone)		0.00%	0.00022	0.00022	lb/ton fired brick	AP-42 Chapter 11.3 (August, 1997), Table 11.3-6, Emission Factors for Organic Pollutant Emissions from Brick Manufacturing Operations, natural gas-fired kiln.	--	2.673	--	--	0.0143	--
71	KILN_TKM	74-88-4	Methyl iodide (iodomethane)		0.00%	0.000093	0.000093	lb/ton fired brick	AP-42 Chapter 11.3 (August, 1997), Table 11.3-6, Emission Factors for Organic Pollutant Emissions from Brick Manufacturing Operations, natural gas-fired kiln.	--	1.12995	--	--	0.006045	--
72	KILN_TKM	100-42-5	Styrene		0.00%	0.00002	0.00002	lb/ton fired brick	AP-42 Chapter 11.3 (August, 1997), Table 11.3-6, Emission Factors for Organic Pollutant Emissions from Brick Manufacturing Operations, natural gas-fired kiln.	--	0.243	--	--	0.0013	--
73	KILN_TKM	127-18-4	Tetrachloroethene (perchloroethylene)		0.00%	0.0000028	0.0000028	lb/ton fired brick	AP-42 Chapter 11.3 (August, 1997), Table 11.3-6, Emission Factors for Organic Pollutant Emissions from Brick Manufacturing Operations, natural gas-fired kiln.	--	0.03402	--	--	0.000182	--
74	KILN_TKM	108-88-3	Toluene		0.00%	0.00016	0.00016	lb/ton fired brick	AP-42 Chapter 11.3 (August, 1997), Table 11.3-6, Emission Factors for Organic Pollutant Emissions from Brick Manufacturing Operations, natural gas-fired kiln.	--	1.944	--	--	0.0104	--
75	KILN_TKM	1330-20-7	Xylene (mixture), including m-xylene, o-xylene, p-xylene		0.00%	0.000067	0.000067	lb/ton fired brick	AP-42 Chapter 11.3 (August, 1997), Table 11.3-6, Emission Factors for Organic Pollutant Emissions from Brick Manufacturing Operations, natural gas-fired kiln.	--	0.81405	--	--	0.004355	--
76	KILN_TKM	95-47-6	o-Xylene		0.00%	0.000058	0.000058	lb/ton fired brick	AP-42 Chapter 11.3 (August, 1997), Table 11.3-6, Emission Factors for Organic Pollutant Emissions from Brick Manufacturing Operations, natural gas-fired kiln.	--	0.7047	--	--	0.00377	--
77	KILN_TKM	7782-50-5	Chlorine		0.00%	0.0013	0.0013	lb/ton fired brick	AP-42 Chapter 11.3 (August, 1997), Table 11.3-6, Emission Factors for Organic Pollutant Emissions from Brick Manufacturing Operations, natural gas-fired kiln.	--	15.795	--	--	0.0845	--
78	KILN_TKM	7664-39-3	Hydrogen fluoride		0.00%	0.76	0.76	lb/ton fired brick	Source Evaluation Report, Horizon Engineering, July 31, 2014.	--	9234	--	--	49.4	--
79	KILN_TKM	7647-01-0	Hydrochloric acid		0.00%	0.17	0.17	lb/ton fired brick	AP-42 Chapter 11.3 (August, 1997), Table 11.3-4, Emission Factors for Hydrogen Fluoride, Total Fluorides, and Hydrogen Chloride from Manufacturing Operations, uncontrolled natural gas-fired tunnel kiln.	--	2065.5	--	--	11.05	--
80	KILN_TKM	106-46-7	p-Dichlorobenzene (1,4-dichlorobenzene)		0.00%	0.000048	0.000048	lb/ton fired brick	AP-42 Chapter 11.3 (August, 1997), Table 11.3-6, Emission Factors for Organic Pollutant Emissions from Brick Manufacturing Operations, natural gas-fired kiln.	--	0.5832	--	--	0.00312	--
81	KILN_TKM	91-57-6	2-Methyl naphthalene		0.00%	0.000057	0.000057	lb/ton fired brick	AP-42 Chapter 11.3 (August, 1997), Table 11.3-6, Emission Factors for Organic Pollutant Emissions from Brick Manufacturing Operations, natural gas-fired kiln.	--	0.69255	--	--	0.003705	--
82	KILN_TKM	91-20-3	Naphthalene		0.00%	0.000065	0.000065	lb/ton fired brick	AP-42 Chapter 11.3 (August, 1997), Table 11.3-6, Emission Factors for Organic Pollutant Emissions from Brick Manufacturing Operations, natural gas-fired kiln.	--	0.78975	--	--	0.004225	--
83	KILN_TKM	108-95-2	Phenol		0.00%	0.000086	0.000086	lb/ton fired brick	AP-42 Chapter 11.3 (August, 1997), Table 11.3-6, Emission Factors for Organic Pollutant Emissions from Brick Manufacturing Operations, natural gas-fired kiln.	--	1.0449	--	--	0.00559	--
84	KILN_TKM	85-68-7	Butyl benzyl phthalate		0.00%	0.000018	0.000018	lb/ton fired brick	AP-42 Chapter 11.3 (August, 1997), Table 11.3-6, Emission Factors for Organic Pollutant Emissions from Brick Manufacturing Operations, natural gas-fired kiln.	--	0.2187	--	--	0.00117	--
85	KILN_TKM	84-74-2	Dibutyl phthalate		0.00%	0.00014	0.00014	lb/ton fired brick	AP-42 Chapter 11.3 (August, 1997), Table 11.3-6, Emission Factors for Organic Pollutant Emissions from Brick Manufacturing Operations, natural gas-fired kiln.	--	1.701	--	--	0.0091	--
86	KILN_TKM	117-81-7	bis(2-Ethylhexyl) phthalate (DEHP)		0.00%	0.002	0.002	lb/ton fired brick	AP-42 Chapter 11.3 (August, 1997), Table 11.3-6, Emission Factors for Organic Pollutant Emissions from Brick Manufacturing Operations, natural gas-fired kiln.	--	24.3	--	--	0.13	--
87	KILN_TKM	84-66-2	Diethylphthalate		0.00%	0.00024	0.00024	lb/ton fired brick	AP-42 Chapter 11.3 (August, 1997), Table 11.3-6, Emission Factors for Organic Pollutant Emissions from Brick Manufacturing Operations, natural gas-fired kiln.	--	2.916	--	--	0.0156	--
88	KILN_M	7429-90-5	Aluminum and compounds		0.00%	0.00000127	0.00000127	lb/lb product	Weight percentages from SDS. PM emission factor from AP-42 Chapter 11.3 (August, 1997), Table 11.3-2, Emission Factors for Total PM, Total PM-10, and Total PM-2.5 from Brick Manufacturing Operations, uncontrolled natural gas-fired kiln.	--	0.38904014	--	--	0.00762353	--
89	KILN_M	7631-86-9	Silica, crystalline (respirable)		0.00%	0.0000264	0.0000264	lb/lb product	Weight percentages from SDS. PM emission factor from AP-42 Chapter 11.3 (August, 1997), Table 11.3-2, Emission Factors for Total PM, Total PM-10, and Total PM-2.5 from Brick Manufacturing Operations, uncontrolled natural gas-fired kiln.	--	8.0833896	--	--	0.1584	--
90	KILN_M	504	Phosphorus and compounds		0.00%	0.00000024	0.00000024	lb/lb product	Weight percentages from SDS. PM emission factor from AP-42 Chapter 11.3 (August, 1997), Table 11.3-2, Emission Factors for Total PM, Total PM-10, and Total PM-2.5 from Brick Manufacturing Operations, uncontrolled natural gas-fired kiln.	--	0.07348536	--	--	0.00144	--
91	KILN_BX	7429-90-5	Aluminum and compounds		0.00%	0.00001779	0.00001779	lb/lb product	Weight percentages from SDS. PM emission factor from AP-42 Chapter 11.3 (August, 1997), Table 11.3-2, Emission Factors for Total PM, Total PM-10, and Total PM-2.5 from Brick Manufacturing Operations, uncontrolled natural gas-fired kiln.	--	3.55670428	--	--	0.07115294	--
92	KILN_BX	7631-86-9	Silica, crystalline (respirable)		0.00%	0.000024	0.000024	lb/lb product	Weight percentages from SDS. PM emission factor from AP-42 Chapter 11.3 (August, 1997), Table 11.3-2, Emission Factors for Total PM, Total PM-10, and Total PM-2.5 from Brick Manufacturing Operations, uncontrolled natural gas-fired kiln.	--	4.798728	--	--	0.096	--
93	KILN_BX	504	Phosphorus and compounds		0.00%	0.0000048	0.0000048	lb/lb product	Weight percentages from SDS. PM emission factor from AP-42 Chapter 11.3 (August, 1997), Table 11.3-2, Emission Factors for Total PM, Total PM-10, and Total PM-2.5 from Brick Manufacturing Operations, uncontrolled natural gas-fired kiln.	--	0.9597456	--	--	0.0192	--
94	KILN_BX	7440-39-3	Barium and compounds		0.00%	0.0000043	0.0000043	lb/lb product	Weight percentages from SDS. PM emission factor from AP-42 Chapter 11.3 (August, 1997), Table 11.3-2, Emission Factors for Total PM, Total PM-10, and Total PM-2.5 from Brick Manufacturing Operations, uncontrolled natural gas-fired kiln.	--	0.8595941	--	--	0.01719644	--
95	KILN_CC	7631-86-9	Silica, crystalline (respirable)		0.00%	0.00000048	0.00000048	lb/lb product	Weight percentages from SDS. PM emission factor from AP-42 Chapter 11.3 (August, 1997), Table 11.3-2, Emission Factors for Total PM, Total PM-10, and Total PM-2.5 from Brick Manufacturing Operations, uncontrolled natural gas-fired kiln.	--	0.00758688	--	--	0.00002784	--
96	KILN_GB	7429-90-5	Aluminum and compounds		0.00%	0.00000249	0.00000249	lb/lb product	Weight percentages from SDS. PM emission factor from AP-42 Chapter 11.3 (August, 1997), Table 11.3-2, Emission Factors for Total PM, Total PM-10, and Total PM-2.5 from Brick Manufacturing Operations, uncontrolled natural gas-fired kiln.	--	0.00057776	--	--	0.0000249	--
97	KILN_GB	7429-90-5	Aluminum and compounds		0.00%	0.00000249	0.00000249	lb/lb product	Weight percentages from SDS. PM emission factor from AP-42 Chapter 11.3 (August, 1997), Table 11.3-2, Emission Factors for Total PM, Total PM-10, and Total PM-2.5 from Brick Manufacturing Operations, uncontrolled natural gas-fired kiln.	--	0.00057776	--	--	0.0000249	--
98	KILN_GB	7631-86-9	Silica, crystalline (respirable)		0.00%	0.00007104	0.00007104	lb/lb product	Weight percentages from SDS. PM emission factor from AP-42 Chapter 11.3 (August, 1997), Table 11.3-2, Emission Factors for Total PM, Total PM-10, and Total PM-2.5 from Brick Manufacturing Operations, uncontrolled natural gas-fired kiln.	--	0.01648128	--	--	0.0007104	--
99	KILN_RC	7631-86-9	Silica, crystalline (respirable)		0.00%	0.000168	0.000168	lb/lb product	Weight percentages from SDS. PM emission factor from AP-42 Chapter 11.3 (August, 1997), Table 11.3-2, Emission Factors for Total PM, Total PM-10, and Total PM-2.5 from Brick Manufacturing Operations, uncontrolled natural gas-fired kiln.	--	1.024968	--	--	0.003864	--
100	KILN_IO	7631-86-9	Silica, crystalline (respirable)		0.00%	0.0000216	0.0000216	lb/lb product	Weight percentages from SDS. PM emission factor from AP-42 Chapter 11.3 (August, 1997), Table 11.3-2, Emission Factors for Total PM, Total PM-10, and Total PM-2.5 from Brick Manufacturing Operations, uncontrolled natural gas-fired kiln.	--	0.0640224	--	--	0.00648	--

101	KILN_IO	7429-90-5	Aluminum and compounds		0.00%	0.00000762	0.00000762	lb/lb product	Weight percentages from SDS. PM emission factor from AP-42 Chapter 11.3 (August, 1997), Table 11.3-2, Emission Factors for Total PM, Total PM-10, and Total PM-2.5 from Brick Manufacturing Operations, uncontrolled natural gas-fired kiln.	--	0.02259614	--	--	0.00228706	--
102	KILN_IONR	7631-86-9	Silica, crystalline (respirable)		0.00%	0.0000144	0.0000144	lb/lb product	Weight percentages from SDS. PM emission factor from AP-42 Chapter 11.3 (August, 1997), Table 11.3-2, Emission Factors for Total PM, Total PM-10, and Total PM-2.5 from Brick Manufacturing Operations, uncontrolled natural gas-fired kiln.	--	0.0476928	--	--	0.0001872	--
103	KILN_BT	7631-86-9	Silica, crystalline (respirable)		0.00%	0.0000192	0.0000192	lb/lb product	Weight percentages from SDS. PM emission factor from AP-42 Chapter 11.3 (August, 1997), Table 11.3-2, Emission Factors for Total PM, Total PM-10, and Total PM-2.5 from Brick Manufacturing Operations, uncontrolled natural gas-fired kiln.	--	0.0044544	--	--	0.0000768	--
104	SILO_1	7440-38-2	Arsenic and compounds		Controlled EF	4.24E-009	4.24E-009	lb/ton product	AP-42 Chapter 11.12 (June 2006) Table 11.12-8 "Concrete Batch Plant Emission Factors." Assumes controlled emission factors for cement silo filling.	--	0.00002332	--	--	0.00000007	--
105	SILO_1	7440-41-7	Beryllium and compounds		Controlled EF	4.86E-010	4.86E-010	lb/ton product	AP-42 Chapter 11.12 (June 2006) Table 11.12-8 "Concrete Batch Plant Emission Factors." Assumes controlled emission factors for cement silo filling.	--	0.00000267	--	--	0.00000001	--
106	SILO_1	18540-29-9	Chromium VI, chromate and dichromate particulate		Controlled EF	0.00000003	0.00000003	lb/ton product	AP-42 Chapter 11.12 (June 2006) Table 11.12-8 "Concrete Batch Plant Emission Factors." Assumes controlled emission factors for cement silo filling. As a conservative estimate, total chromium is assumed to be hexavalent chromium.	--	0.0001595	--	--	0.00000051	--
107	SILO_1	7439-92-1	Lead and compounds		Controlled EF	0.00000001	0.00000001	lb/ton product	AP-42 Chapter 11.12 (June 2006) Table 11.12-8 "Concrete Batch Plant Emission Factors." Assumes controlled emission factors for cement silo filling.	--	0.00005995	--	--	0.00000019	--
108	SILO_1	7439-96-5	Manganese and compounds		Controlled EF	0.00000012	0.00000012	lb/ton product	AP-42 Chapter 11.12 (June 2006) Table 11.12-8 "Concrete Batch Plant Emission Factors." Assumes controlled emission factors for cement silo filling.	--	0.0006435	--	--	0.00000206	--
109	SILO_1	7440-02-0	Nickel and compounds		Controlled EF	0.00000004	0.00000004	lb/ton product	AP-42 Chapter 11.12 (June 2006) Table 11.12-8 "Concrete Batch Plant Emission Factors." Assumes controlled emission factors for cement silo filling.	--	0.0002299	--	--	0.00000074	--
110	SILO_2	7440-38-2	Arsenic and compounds		Controlled EF	4.24E-009	4.24E-009	lb/ton product	AP-42 Chapter 11.12 (June 2006) Table 11.12-8 "Concrete Batch Plant Emission Factors." Assumes controlled emission factors for cement silo filling.	--	0.00002332	--	--	0.00000007	--
111	SILO_2	7440-41-7	Beryllium and compounds		Controlled EF	4.86E-010	4.86E-010	lb/ton product	AP-42 Chapter 11.12 (June 2006) Table 11.12-8 "Concrete Batch Plant Emission Factors." Assumes controlled emission factors for cement silo filling.	--	0.00000267	--	--	0.00000001	--
112	SILO_2	18540-29-9	Chromium VI, chromate and dichromate particulate		Controlled EF	0.00000003	0.00000003	lb/ton product	AP-42 Chapter 11.12 (June 2006) Table 11.12-8 "Concrete Batch Plant Emission Factors." Assumes controlled emission factors for cement silo filling. As a conservative estimate, total chromium is assumed to be hexavalent chromium.	--	0.0001595	--	--	0.00000051	--
113	SILO_2	7439-92-1	Lead and compounds		Controlled EF	0.00000001	0.00000001	lb/ton product	AP-42 Chapter 11.12 (June 2006) Table 11.12-8 "Concrete Batch Plant Emission Factors." Assumes controlled emission factors for cement silo filling.	--	0.00005995	--	--	0.00000019	--
114	SILO_2	7439-96-5	Manganese and compounds		Controlled EF	0.00000012	0.00000012	lb/ton product	AP-42 Chapter 11.12 (June 2006) Table 11.12-8 "Concrete Batch Plant Emission Factors." Assumes controlled emission factors for cement silo filling.	--	0.0006435	--	--	0.00000206	--
115	SILO_2	7440-02-0	Nickel and compounds		Controlled EF	0.00000004	0.00000004	lb/ton product	AP-42 Chapter 11.12 (June 2006) Table 11.12-8 "Concrete Batch Plant Emission Factors." Assumes controlled emission factors for cement silo filling.	--	0.0002299	--	--	0.00000074	--
116	SILO_3	7440-38-2	Arsenic and compounds		Controlled EF	4.24E-009	4.24E-009	lb/ton product	AP-42 Chapter 11.12 (June 2006) Table 11.12-8 "Concrete Batch Plant Emission Factors." Assumes controlled emission factors for cement silo filling.	--	0.00002332	--	--	0.00000007	--
117	SILO_3	7440-41-7	Beryllium and compounds		Controlled EF	4.86E-010	4.86E-010	lb/ton product	AP-42 Chapter 11.12 (June 2006) Table 11.12-8 "Concrete Batch Plant Emission Factors." Assumes controlled emission factors for cement silo filling.	--	0.00000267	--	--	0.00000001	--
118	SILO_3	18540-29-9	Chromium VI, chromate and dichromate particulate		Controlled EF	0.00000003	0.00000003	lb/ton product	AP-42 Chapter 11.12 (June 2006) Table 11.12-8 "Concrete Batch Plant Emission Factors." Assumes controlled emission factors for cement silo filling. As a conservative estimate, total chromium is assumed to be hexavalent chromium.	--	0.0001595	--	--	0.00000051	--
119	SILO_3	7439-92-1	Lead and compounds		Controlled EF	0.00000001	0.00000001	lb/ton product	AP-42 Chapter 11.12 (June 2006) Table 11.12-8 "Concrete Batch Plant Emission Factors." Assumes controlled emission factors for cement silo filling.	--	0.00005995	--	--	0.00000019	--
120	SILO_3	7439-96-5	Manganese and compounds		Controlled EF	0.00000012	0.00000012	lb/ton product	AP-42 Chapter 11.12 (June 2006) Table 11.12-8 "Concrete Batch Plant Emission Factors." Assumes controlled emission factors for cement silo filling.	--	0.0006435	--	--	0.00000206	--
121	SILO_3	7440-02-0	Nickel and compounds		Controlled EF	0.00000004	0.00000004	lb/ton product	AP-42 Chapter 11.12 (June 2006) Table 11.12-8 "Concrete Batch Plant Emission Factors." Assumes controlled emission factors for cement silo filling.	--	0.0002299	--	--	0.00000074	--
122	SILO_4	7440-38-2	Arsenic and compounds		Controlled EF	4.24E-009	4.24E-009	lb/ton product	AP-42 Chapter 11.12 (June 2006) Table 11.12-8 "Concrete Batch Plant Emission Factors." Assumes controlled emission factors for cement silo filling.	--	0.00002332	--	--	0.00000007	--
123	SILO_4	7440-41-7	Beryllium and compounds		Controlled EF	4.86E-010	4.86E-010	lb/ton product	AP-42 Chapter 11.12 (June 2006) Table 11.12-8 "Concrete Batch Plant Emission Factors." Assumes controlled emission factors for cement silo filling.	--	0.00000267	--	--	0.00000001	--
124	SILO_4	18540-29-9	Chromium VI, chromate and dichromate particulate		Controlled EF	0.00000003	0.00000003	lb/ton product	AP-42 Chapter 11.12 (June 2006) Table 11.12-8 "Concrete Batch Plant Emission Factors." Assumes controlled emission factors for cement silo filling. As a conservative estimate, total chromium is assumed to be hexavalent chromium.	--	0.0001595	--	--	0.00000051	--
125	SILO_4	7439-92-1	Lead and compounds		Controlled EF	0.00000001	0.00000001	lb/ton product	AP-42 Chapter 11.12 (June 2006) Table 11.12-8 "Concrete Batch Plant Emission Factors." Assumes controlled emission factors for cement silo filling.	--	0.00005995	--	--	0.00000019	--
126	SILO_4	7439-96-5	Manganese and compounds		Controlled EF	0.00000012	0.00000012	lb/ton product	AP-42 Chapter 11.12 (June 2006) Table 11.12-8 "Concrete Batch Plant Emission Factors." Assumes controlled emission factors for cement silo filling.	--	0.0006435	--	--	0.00000206	--
127	SILO_4	7440-02-0	Nickel and compounds		Controlled EF	0.00000004	0.00000004	lb/ton product	AP-42 Chapter 11.12 (June 2006) Table 11.12-8 "Concrete Batch Plant Emission Factors." Assumes controlled emission factors for cement silo filling.	--	0.0002299	--	--	0.00000074	--
128	SILO_5	7440-38-2	Arsenic and compounds		Controlled EF	4.24E-009	4.24E-009	lb/ton product	AP-42 Chapter 11.12 (June 2006) Table 11.12-8 "Concrete Batch Plant Emission Factors." Assumes controlled emission factors for cement silo filling.	--	0.00002332	--	--	0.00000007	--
129	SILO_5	7440-41-7	Beryllium and compounds		Controlled EF	4.86E-010	4.86E-010	lb/ton product	AP-42 Chapter 11.12 (June 2006) Table 11.12-8 "Concrete Batch Plant Emission Factors." Assumes controlled emission factors for cement silo filling.	--	0.00000267	--	--	0.00000001	--
130	SILO_5	18540-29-9	Chromium VI, chromate and dichromate particulate		Controlled EF	0.00000003	0.00000003	lb/ton product	AP-42 Chapter 11.12 (June 2006) Table 11.12-8 "Concrete Batch Plant Emission Factors." Assumes controlled emission factors for cement silo filling. As a conservative estimate, total chromium is assumed to be hexavalent chromium.	--	0.0001595	--	--	0.00000051	--
131	SILO_5	7439-92-1	Lead and compounds		Controlled EF	0.00000001	0.00000001	lb/ton product	AP-42 Chapter 11.12 (June 2006) Table 11.12-8 "Concrete Batch Plant Emission Factors." Assumes controlled emission factors for cement silo filling.	--	0.00005995	--	--	0.00000019	--
132	SILO_5	7439-96-5	Manganese and compounds		Controlled EF	0.00000012	0.00000012	lb/ton product	AP-42 Chapter 11.12 (June 2006) Table 11.12-8 "Concrete Batch Plant Emission Factors." Assumes controlled emission factors for cement silo filling.	--	0.0006435	--	--	0.00000206	--
133	SILO_5	7440-02-0	Nickel and compounds		Controlled EF	0.00000004	0.00000004	lb/ton product	AP-42 Chapter 11.12 (June 2006) Table 11.12-8 "Concrete Batch Plant Emission Factors." Assumes controlled emission factors for cement silo filling.	--	0.0002299	--	--	0.00000074	--
134	SILO_6	7440-38-2	Arsenic and compounds		Controlled EF	4.24E-009	4.24E-009	lb/ton product	AP-42 Chapter 11.12 (June 2006) Table 11.12-8 "Concrete Batch Plant Emission Factors." Assumes controlled emission factors for cement silo filling.	--	0.00002332	--	--	0.00000007	--
135	SILO_6	7440-41-7	Beryllium and compounds		Controlled EF	4.86E-010	4.86E-010	lb/ton product	AP-42 Chapter 11.12 (June 2006) Table 11.12-8 "Concrete Batch Plant Emission Factors." Assumes controlled emission factors for cement silo filling.	--	0.00000267	--	--	0.00000001	--
136	SILO_6	18540-29-9	Chromium VI, chromate and dichromate particulate		Controlled EF	0.00000003	0.00000003	lb/ton product	AP-42 Chapter 11.12 (June 2006) Table 11.12-8 "Concrete Batch Plant Emission Factors." Assumes controlled emission factors for cement silo filling. As a conservative estimate, total chromium is assumed to be hexavalent chromium.	--	0.0001595	--	--	0.00000051	--
137	SILO_6	7439-92-1	Lead and compounds		Controlled EF	0.00000001	0.00000001	lb/ton product	AP-42 Chapter 11.12 (June 2006) Table 11.12-8 "Concrete Batch Plant Emission Factors." Assumes controlled emission factors for cement silo filling.	--	0.00005995	--	--	0.00000019	--
138	SILO_6	7439-96-5	Manganese and compounds		Controlled EF	0.00000012	0.00000012	lb/ton product	AP-42 Chapter 11.12 (June 2006) Table 11.12-8 "Concrete Batch Plant Emission Factors." Assumes controlled emission factors for cement silo filling.	--	0.0006435	--	--	0.00000206	--
139	SILO_6	7440-02-0	Nickel and compounds		Controlled EF	0.00000004	0.00000004	lb/ton product	AP-42 Chapter 11.12 (June 2006) Table 11.12-8 "Concrete Batch Plant Emission Factors." Assumes controlled emission factors for cement silo filling.	--	0.0002299	--	--	0.00000074	--
140	SILO_7	7440-38-2	Arsenic and compounds		Controlled EF	4.24E-009	4.24E-009	lb/ton product	AP-42 Chapter 11.12 (June 2006) Table 11.12-8 "Concrete Batch Plant Emission Factors." Assumes controlled emission factors for cement silo filling.	--	0.00002332	--	--	0.00000007	--
141	SILO_7	7440-41-7	Beryllium and compounds		Controlled EF	4.86E-010	4.86E-010	lb/ton product	AP-42 Chapter 11.12 (June 2006) Table 11.12-8 "Concrete Batch Plant Emission Factors." Assumes controlled emission factors for cement silo filling.	--	0.00000267	--	--	0.00000001	--
142	SILO_7	18540-29-9	Chromium VI, chromate and dichromate particulate		Controlled EF	0.00000003	0.00000003	lb/ton product	AP-42 Chapter 11.12 (June 2006) Table 11.12-8 "Concrete Batch Plant Emission Factors." Assumes controlled emission factors for cement silo filling. As a conservative estimate, total chromium is assumed to be hexavalent chromium.	--	0.0001595	--	--	0.00000051	--
143	SILO_7	7439-92-1	Lead and compounds		Controlled EF	0.00000001	0.00000001	lb/ton product	AP-42 Chapter 11.12 (June 2006) Table 11.12-8 "Concrete Batch Plant Emission Factors." Assumes controlled emission factors for cement silo filling.	--	0.00005995	--	--	0.00000019	--
144	SILO_7	7439-96-5	Manganese and compounds		Controlled EF	0.00000012	0.00000012	lb/ton product	AP-42 Chapter 11.12 (June 2006) Table 11.12-8 "Concrete Batch Plant Emission Factors." Assumes controlled emission factors for cement silo filling.	--	0.0006435	--	--	0.00000206	--
145	SILO_7	7440-02-0	Nickel and compounds		Controlled EF	0.00000004	0.00000004	lb/ton product	AP-42 Chapter 11.12 (June 2006) Table 11.12-8 "Concrete Batch Plant Emission Factors." Assumes controlled emission factors for cement silo filling.	--	0.0002299	--	--	0.00000074	--
146	SILO_8	7440-38-2	Arsenic and compounds		Controlled EF	4.24E-009	4.24E-009	lb/ton product	AP-42 Chapter 11.12 (June 2006) Table 11.12-8 "Concrete Batch Plant Emission Factors." Assumes controlled emission factors for cement silo filling.	--	0.00002332	--	--	0.00000007	--
147	SILO_8	7440-41-7	Beryllium and compounds		Controlled EF	4.86E-010	4.86E-010	lb/ton product	AP-42 Chapter 11.12 (June 2006) Table 11.12-8 "Concrete Batch Plant Emission Factors." Assumes controlled emission factors for cement silo filling.	--	0.00000267	--	--	0.00000001	--
148	SILO_8	18540-29-9	Chromium VI, chromate and dichromate particulate		Controlled EF	0.00000003	0.00000003	lb/ton product	AP-42 Chapter 11.12 (June 2006) Table 11.12-8 "Concrete Batch Plant Emission Factors." Assumes controlled emission factors for cement silo filling. As a conservative estimate, total chromium is assumed to be hexavalent chromium.	--	0.0001595	--	--	0.00000051	--
149	SILO_8	7439-92-1	Lead and compounds		Controlled EF	0.00000001	0.00000001	lb/ton product	AP-42 Chapter 11.12 (June 2006) Table 11.12-8 "Concrete Batch Plant Emission Factors." Assumes controlled emission factors for cement silo filling.	--	0.00005995	--	--	0.00000019	--
150	SILO_8	7439-96-5	Manganese and compounds		Controlled EF	0.00000012	0.00000012	lb/ton product	AP-42 Chapter 11.12 (June 2006) Table 11.12-8 "Concrete Batch Plant Emission Factors." Assumes controlled emission factors for cement silo filling.	--	0.0006435	--	--	0.00000206	--

151	SILO_8	7440-02-0	Nickel and compounds		Controlled EF	0.00000004	0.00000004	lb/ton product	AP-42 Chapter 11.12 (June 2006) Table 11.12-8 "Concrete Batch Plant Emission Factors." Assumes controlled emission factors for cement silo filling.	--	0.0002299	--	--	0.00000074	--
152	SILO_9	7440-38-2	Arsenic and compounds		Controlled EF	4.24E-009	4.24E-009	lb/ton product	AP-42 Chapter 11.12 (June 2006) Table 11.12-8 "Concrete Batch Plant Emission Factors." Assumes controlled emission factors for cement silo filling.	--	0.00002332	--	--	0.00000007	--
153	SILO_9	7440-41-7	Beryllium and compounds		Controlled EF	4.86E-010	4.86E-010	lb/ton product	AP-42 Chapter 11.12 (June 2006) Table 11.12-8 "Concrete Batch Plant Emission Factors." Assumes controlled emission factors for cement silo filling.	--	0.00000267	--	--	0.00000001	--
154	SILO_9	18540-29-9	Chromium VI, chromate and dichromate particulate		Controlled EF	0.00000003	0.00000003	lb/ton product	AP-42 Chapter 11.12 (June 2006) Table 11.12-8 "Concrete Batch Plant Emission Factors." Assumes controlled emission factors for cement silo filling. As a conservative estimate, total chromium is assumed to be hexavalent chromium.	--	0.0001595	--	--	0.00000051	--
155	SILO_9	7439-92-1	Lead and compounds		Controlled EF	0.00000001	0.00000001	lb/ton product	AP-42 Chapter 11.12 (June 2006) Table 11.12-8 "Concrete Batch Plant Emission Factors." Assumes controlled emission factors for cement silo filling.	--	0.00005995	--	--	0.00000019	--
156	SILO_9	7439-96-5	Manganese and compounds		Controlled EF	0.00000012	0.00000012	lb/ton product	AP-42 Chapter 11.12 (June 2006) Table 11.12-8 "Concrete Batch Plant Emission Factors." Assumes controlled emission factors for cement silo filling.	--	0.0006435	--	--	0.00000206	--
157	SILO_9	7440-02-0	Nickel and compounds		Controlled EF	0.00000004	0.00000004	lb/ton product	AP-42 Chapter 11.12 (June 2006) Table 11.12-8 "Concrete Batch Plant Emission Factors." Assumes controlled emission factors for cement silo filling.	--	0.0002299	--	--	0.00000074	--
158	SILO_10	7440-38-2	Arsenic and compounds		Controlled EF	4.24E-009	4.24E-009	lb/ton product	AP-42 Chapter 11.12 (June 2006) Table 11.12-8 "Concrete Batch Plant Emission Factors." Assumes controlled emission factors for cement silo filling.	--	0.00002332	--	--	0.00000007	--
159	SILO_10	7440-41-7	Beryllium and compounds		Controlled EF	4.86E-010	4.86E-010	lb/ton product	AP-42 Chapter 11.12 (June 2006) Table 11.12-8 "Concrete Batch Plant Emission Factors." Assumes controlled emission factors for cement silo filling.	--	0.00000267	--	--	0.00000001	--
160	SILO_10	18540-29-9	Chromium VI, chromate and dichromate particulate		Controlled EF	0.00000003	0.00000003	lb/ton product	AP-42 Chapter 11.12 (June 2006) Table 11.12-8 "Concrete Batch Plant Emission Factors." Assumes controlled emission factors for cement silo filling. As a conservative estimate, total chromium is assumed to be hexavalent chromium.	--	0.0001595	--	--	0.00000051	--
161	SILO_10	7439-92-1	Lead and compounds		Controlled EF	0.00000001	0.00000001	lb/ton product	AP-42 Chapter 11.12 (June 2006) Table 11.12-8 "Concrete Batch Plant Emission Factors." Assumes controlled emission factors for cement silo filling.	--	0.00005995	--	--	0.00000019	--
162	SILO_10	7439-96-5	Manganese and compounds		Controlled EF	0.00000012	0.00000012	lb/ton product	AP-42 Chapter 11.12 (June 2006) Table 11.12-8 "Concrete Batch Plant Emission Factors." Assumes controlled emission factors for cement silo filling.	--	0.0006435	--	--	0.00000206	--
163	SILO_10	7440-02-0	Nickel and compounds		Controlled EF	0.00000004	0.00000004	lb/ton product	AP-42 Chapter 11.12 (June 2006) Table 11.12-8 "Concrete Batch Plant Emission Factors." Assumes controlled emission factors for cement silo filling.	--	0.0002299	--	--	0.00000074	--
164	NG	7440-38-2	Arsenic and compounds		None	0.0002	0.0002	lb/MMscf	DEQ provided natural gas combustion emission factors. Assumes heat input between 10 and 100 MMBtu/hr.	--	0.02049123	--	--	0.00005614	--
165	NG	7440-39-3	Barium and compounds		None	0.0044	0.0044	lb/MMscf	DEQ provided natural gas combustion emission factors. Assumes heat input between 10 and 100 MMBtu/hr.	--	0.45080702	--	--	0.00123509	--
166	NG	7440-41-7	Beryllium and compounds		None	0.000012	0.000012	lb/MMscf	DEQ provided natural gas combustion emission factors. Assumes heat input between 10 and 100 MMBtu/hr.	--	0.00122947	--	--	0.00000337	--
167	NG	7440-43-9	Cadmium and compounds		None	0.0011	0.0011	lb/MMscf	DEQ provided natural gas combustion emission factors. Assumes heat input between 10 and 100 MMBtu/hr.	--	0.11270175	--	--	0.00030877	--
168	NG	18540-29-9	Chromium VI, chromate and dichromate particulate		None	0.000056	0.000056	lb/MMscf	DEQ provided natural gas combustion emission factors. Assumes heat input between 10 and 100 MMBtu/hr. Based on assumptions used by the EPA as outlined in the 2011 National Emissions Inventory. EPA assumes that 4 percent of chromium emitted during natural gas combustion is in the form of hexavalent chromium.	--	0.00573754	--	--	0.00001572	--
169	NG	7440-48-4	Cobalt and compounds		None	0.000084	0.000084	lb/MMscf	DEQ provided natural gas combustion emission factors. Assumes heat input between 10 and 100 MMBtu/hr.	--	0.00860632	--	--	0.00002358	--
170	NG	7440-50-8	Copper and compounds		None	0.00085	0.00085	lb/MMscf	DEQ provided natural gas combustion emission factors. Assumes heat input between 10 and 100 MMBtu/hr.	--	0.08708772	--	--	0.0002386	--
171	NG	7439-92-1	Lead and compounds		None	0.0005	0.0005	lb/MMscf	DEQ provided natural gas combustion emission factors. Assumes heat input between 10 and 100 MMBtu/hr.	--	0.05122807	--	--	0.00014035	--
172	NG	7439-96-5	Manganese and compounds		None	0.00038	0.00038	lb/MMscf	DEQ provided natural gas combustion emission factors. Assumes heat input between 10 and 100 MMBtu/hr.	--	0.03893333	--	--	0.00010667	--
173	NG	7439-97-6	Mercury and compounds		None	0.00026	0.00026	lb/MMscf	DEQ provided natural gas combustion emission factors. Assumes heat input between 10 and 100 MMBtu/hr.	--	0.0266386	--	--	0.00007298	--
174	NG	7440-02-0	Nickel and compounds		None	0.0021	0.0021	lb/MMscf	DEQ provided natural gas combustion emission factors. Assumes heat input between 10 and 100 MMBtu/hr.	--	0.21515789	--	--	0.00058947	--
175	NG	7782-49-2	Selenium and compounds		None	0.000024	0.000024	lb/MMscf	DEQ provided natural gas combustion emission factors. Assumes heat input between 10 and 100 MMBtu/hr.	--	0.00245895	--	--	0.00000674	--
176	NG	7440-62-2	Vanadium (fume or dust)		None	0.0023	0.0023	lb/MMscf	DEQ provided natural gas combustion emission factors. Assumes heat input between 10 and 100 MMBtu/hr.	--	0.23564912	--	--	0.00064561	--
177	NG	7440-66-6	Zinc and compounds		None	0.029	0.029	lb/MMscf	DEQ provided natural gas combustion emission factors. Assumes heat input between 10 and 100 MMBtu/hr.	--	2.97122807	--	--	0.00814035	--
178	NG	75-07-0	Acetaldehyde		None	0.0031	0.0031	lb/MMscf	DEQ provided natural gas combustion emission factors. Assumes heat input between 10 and 100 MMBtu/hr.	--	0.31761404	--	--	0.00087018	--
179	NG	107-02-8	Acrolein		None	0.0027	0.0027	lb/MMscf	DEQ provided natural gas combustion emission factors. Assumes heat input between 10 and 100 MMBtu/hr.	--	0.27663158	--	--	0.00075789	--
180	NG	71-43-2	Benzene		None	0.0058	0.0058	lb/MMscf	DEQ provided natural gas combustion emission factors. Assumes heat input between 10 and 100 MMBtu/hr.	--	0.59424561	--	--	0.00162807	--
181	NG	100-41-4	Ethyl benzene		None	0.0069	0.0069	lb/MMscf	DEQ provided natural gas combustion emission factors. Assumes heat input between 10 and 100 MMBtu/hr.	--	0.70694737	--	--	0.00193684	--
182	NG	50-00-0	Formaldehyde		None	0.0123	0.0123	lb/MMscf	DEQ provided natural gas combustion emission factors. Assumes heat input between 10 and 100 MMBtu/hr.	--	1.26021053	--	--	0.00345263	--
183	NG	110-54-3	Hexane		None	0.0046	0.0046	lb/MMscf	DEQ provided natural gas combustion emission factors. Assumes heat input between 10 and 100 MMBtu/hr.	--	0.47129825	--	--	0.00129123	--
184	NG	108-88-3	Toluene		None	0.0265	0.0265	lb/MMscf	DEQ provided natural gas combustion emission factors. Assumes heat input between 10 and 100 MMBtu/hr.	--	2.71508772	--	--	0.0074386	--
185	NG	1330-20-7	Xylene (mixture), including m-xylene, o-xylene, p-xylene		None	0.0197	0.0197	lb/MMscf	DEQ provided natural gas combustion emission factors. Assumes heat input between 10 and 100 MMBtu/hr.	--	2.01838596	--	--	0.00552982	--
186	NG	7664-41-7	Ammonia		None	3.2	3.2	lb/MMscf	DEQ provided natural gas combustion emission factors. Assumes heat input between 10 and 100 MMBtu/hr.	--	327.85964912	--	--	0.89824561	--
187	NG	1313-27-5	Molybdenum trioxide		None	0.00165	0.00165	lb/MMscf	DEQ provided natural gas combustion emission factors. Assumes heat input between 10 and 100 MMBtu/hr.	--	0.16905263	--	--	0.00046316	--
188	NG	401	Polycyclic aromatic hydrocarbons (PAHs)		None	0.0001	0.0001	lb/MMscf	DEQ provided natural gas combustion emission factors. Assumes heat input between 10 and 100 MMBtu/hr.	--	0.01024561	--	--	0.00002807	--
189	NG	50-32-8	Benzo[a]pyrene		None	0.0000012	0.0000012	lb/MMscf	DEQ provided natural gas combustion emission factors. Assumes heat input between 10 and 100 MMBtu/hr.	--	0.00012295	--	--	0.00000034	--
190	NG	91-20-3	Naphthalene		None	0.0003	0.0003	lb/MMscf	DEQ provided natural gas combustion emission factors. Assumes heat input between 10 and 100 MMBtu/hr.	--	0.03073684	--	--	0.00008421	--
191
192
193
194
195
196
197
198
199
200

201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250

251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300

301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350

351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400

401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450

451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501	INSERT ROWS ABOVE THIS LINE INSERT ROWS ABOVE THIS LINE INSERT ROWS ABOVE THIS LINE INSERT ROWS ABOVE THIS LINE
502
503