Hi Randy,
Thank you for the information. I was also wondering about the temperature gauge at the WTP pump house. Is this also ready for final installation? And is there a way for the temperature to be accessed and recorded at the WWTP?
Jennifer Cline, P.E.
City of Molalla
Public Works Director
O: 503.759.0218
F: 503.829.3676
"From: Randy Bos [mailto:rjb@industrialsystems-inc.com]
Sent: Thursday, June 25, 2015 3:47 PM
To: Jennifer Cline
Cc: Troy Collison; John Sowards
Subject: WWTP Headworks pH Probe
Hi Jennifer,
This morning John and I were out at the treatment plant. He was checking control panels for spare relays and terminals for the drive signal modifications and I picked up the Lab Data. The pH meter values are tracking the grab sample pH values very well. I would recommend proceeding with the installation based on the past several weeks of data. Please review the attached table and chart. Also is a pdf copy if you need to send it off to DEQ.
Thanks for gathering the data for us.
Randy
Randal J. Bos
5835 NE 122nd Avenue, Suite #110
Portland, Oregon 97230
http://www.industrialsystems-inc.com
Phone: 503.262.0367 x- 310
Cell: 360.904.7087
Fax: 503.262.0371
CCB # 196597 WA #INDUSSI880K9