Okay, thank you.
Jennifer Cline, P.E.
City of Molalla
Public Works Director
O: 503.759.0218
F: 503.829.3676
"From: Randy Bos [mailto:rjb@industrialsystems-inc.com]
Sent: Thursday, June 25, 2015 3:58 PM
To: Jennifer Cline
Cc: Troy Collison; John Sowards; Jason Clifford
Subject: RE: WWTP Headworks pH Probe
That’s the plan. When all the pH and temperature sensors are permanently installed and the VPN connection is made between the water and wastewater SCADA servers you’ll be able to share whatever information you need between the two.
From: Jennifer Cline [mailto:jcline@cityofmolalla.com]
Sent: Thursday, June 25, 2015 3:51 PM
To: Randy Bos
Cc: Troy Collison; John Sowards; Jason Clifford
Subject: RE: WWTP Headworks pH Probe
Hi Randy,
Thank you for the information. I was also wondering about the temperature gauge at the WTP pump house. Is this also ready for final installation? And is there a way for the temperature to be accessed and recorded at the WWTP?
Jennifer Cline, P.E.
City of Molalla
Public Works Director
O: 503.759.0218
F: 503.829.3676
From: Randy Bos [mailto:rjb@industrialsystems-inc.com]
Sent: Thursday, June 25, 2015 3:47 PM
To: Jennifer Cline
Cc: Troy Collison; John Sowards
Subject: WWTP Headworks pH Probe
Hi Jennifer,
This morning John and I were out at the treatment plant. He was checking control panels for spare relays and terminals for the drive signal modifications and I picked up the Lab Data. The pH meter values are tracking the grab sample pH values very well. I would recommend proceeding with the installation based on the past several weeks of data. Please review the attached table and chart. Also is a pdf copy if you need to send it off to DEQ.
Thanks for gathering the data for us.
Randy
Randal J. Bos
5835 NE 122nd Avenue, Suite #110
Portland, Oregon 97230
http://www.industrialsystems-inc.com
Phone: 503.262.0367 x- 310
Cell: 360.904.7087
Fax: 503.262.0371
CCB # 196597 WA #INDUSSI880K9