From: Jennifer Cline
Sent: Tue Feb 17 15:19:37 2015
To: Troy Collison
Cc: John Sowards; Mark Lietzke; Keith Stiglbauer; Heather Penni
Subject: RE: nervous level transducer at the WTP
Importance: Normal
Attachments: MolallaWTP_Dailer_2015-02-13.pdf;
Hi Troy,
I was not able to find his email unfortunately. However, attached is the signed quote for installing a new dialer at the WTP.
Please make sure to Cc me on all futures quotes.
Thanks,
Jennifer Cline, P.E.
City of Molalla
Public Works Director
O: 503.759.0218
F: 503.829.3676
"file:///C:
From: Troy Collison [mailto:tbc@industrialsystems-inc.com]
Sent: Tuesday, February 17, 2015 2:59 PM
To: Jennifer Cline; Keith Stiglbauer
Cc: John Sowards; Mark Lietzke
Subject: RE: nervous level transducer at the WTP
Please see attached
This was sent by John in our office last Friday.
Thanks
troy
From: Jennifer Cline [mailto:jcline@cityofmolalla.com]
Sent: Tuesday, February 17, 2015 2:55 PM
To: Troy Collison; Keith Stiglbauer
Cc: John Sowards; Mark Lietzke
Subject: RE: nervous level transducer at the WTP
Hi Troy,
I have not seen an invoice to approve from Industrial Systems. Can you please email it my way?
Thank You,
Jennifer Cline, P.E.
City of Molalla
Public Works Director
O: 503.759.0218
F: 503.829.3676
"file:///C:
From: Troy Collison [mailto:tbc@industrialsystems-inc.com]
Sent: Tuesday, February 17, 2015 2:30 PM
To: Keith Stiglbauer
Cc: John Sowards; Mark Lietzke; Jennifer Cline
Subject: RE: nervous level transducer at the WTP
We submitted the proposal to the City as you requested and have had no reply.
Thanks
Troy
From: Keith Stiglbauer [mailto:kstiglbauer@cityofmolalla.com]
Sent: Tuesday, February 17, 2015 2:27 PM
To: Troy Collison
Cc: John Sowards; Mark Lietzke; Jennifer Cline
Subject: Re: nervous level transducer at the WTP
Hey what's going on with the dialer?
From: "Troy Collison" <tbc@industrialsystems-inc.com>
To: "Keith Stiglbauer" <kstiglbauer@cityofmolalla.com>
Cc: "jns" <jns@industrialsystems-inc.com>, "Mark Lietzke" <msl@industrialsystems-inc.com>, "Jennifer Cline" <jcline@cityofmolalla.com>
Sent: Friday, February 13, 2015 8:15:59 AM
Subject: RE: nervous level transducer at the WTP
We do not have a replacement auto dialer yet.
We are pursuing two possible solution 1) a direct replacement for what you have and 2) any dialer that is available TODAY that could be installed as a stop gap alarm notification tool.
John will keep you posted.
Thanks
Troy
From: Keith Stiglbauer [mailto:kstiglbauer@cityofmolalla.com]
Sent: Friday, February 13, 2015 7:38 AM
To: Troy Collison
Cc: jns; Mark Lietzke; Jennifer Cline
Subject: Re: nervous level transducer at the WTP
Good morning troy
We had another alarm last night with no alarm. Have turned it off. I assume we with not have a dialer today being Friday. And we have a three day weekend. Please let me know ASAP so I can make arrangements to have the plant covered for the weekend. Keith
From: "Troy Collison" <tbc@industrialsystems-inc.com>
To: "Keith Stiglbauer (kstiglbauer@cityofmolalla.com)" <kstiglbauer@cityofmolalla.com>
Cc: "jns" <jns@industrialsystems-inc.com>, "Mark Lietzke" <msl@industrialsystems-inc.com>
Sent: Thursday, February 12, 2015 2:43:48 PM
Subject: FW: nervous level transducer at the WTP
Keith
We are assuming the dialer is broken and trying to locate a replacement.
I suppose the fact it called you when there are no alarms present is a good indicator that it IS broker?
Perhaps you should just unplug it?
Troy
From: Keith Stiglbauer [mailto:kstiglbauer@cityofmolalla.com]
Sent: Thursday, February 12, 2015 10:41 AM
To: Troy Collison
Subject: Re: nervous level transducer at the WTP
Just wanted to let you know dialer called last night no alarms at the plant at 11:50 pm.
From: "Troy Collison" <tbc@industrialsystems-inc.com>
To: "Keith Stiglbauer" <kstiglbauer@cityofmolalla.com>
Sent: Tuesday, February 10, 2015 7:59:32 AM
Subject: RE: nervous level transducer at the WTP
Awesome thanks
From: Keith Stiglbauer [mailto:kstiglbauer@cityofmolalla.com]
Sent: Tuesday, February 10, 2015 7:58 AM
To: Troy Collison
Subject: Re: nervous level transducer at the WTP
Raco Verbatim V21256 I do have a manual at the plant also.
From: "Troy Collison" <tbc@industrialsystems-inc.com>
To: "Keith Stiglbauer" <kstiglbauer@cityofmolalla.com>
Sent: Tuesday, February 10, 2015 7:50:48 AM
Subject: RE: nervous level transducer at the WTP
Keith
Can you give us the model # of the dialer so we can print the manual for it?
Thanks
From: Keith Stiglbauer [mailto:kstiglbauer@cityofmolalla.com]
Sent: Tuesday, February 10, 2015 7:16 AM
To: Troy Collison
Subject: Re: nervous level transducer at the WTP
Please let me know when to expect your staff Tuesday.
From: "Troy Collison" <tbc@industrialsystems-inc.com>
To: "Keith Stiglbauer" <kstiglbauer@cityofmolalla.com>
Sent: Monday, February 9, 2015 1:00:29 PM
Subject: RE: nervous level transducer at the WTP
Oh – yes – about the failed dialer.
That is on the list for tomorrow.
I would be surprised if it just lost its programming but we will look at.
From: Keith Stiglbauer [mailto:kstiglbauer@cityofmolalla.com]
Sent: Monday, February 09, 2015 1:00 PM
To: Troy Collison
Subject: Re: nervous level transducer at the WTP
At the water plant did Mark not call you?
From: "Troy Collison" <tbc@industrialsystems-inc.com>
To: "Keith Stiglbauer" <kstiglbauer@cityofmolalla.com>
Sent: Monday, February 9, 2015 12:53:18 PM
Subject: RE: nervous level transducer at the WTP
OK Thanks
I like ultra-conic but would have chosen a Siemens Hydro Ranger 200 and XPS 15 transducer.
They are pretty solid and we install probably 10 or 15 a year.
A drop in sensor in a clearwell is still pretty standard too. There is no need to empty the clearwell, just suspend them from a cable pipe.
Anyway, we will be out there tomorrow afternoon.
You have no alarms where?
From: Keith Stiglbauer [mailto:kstiglbauer@cityofmolalla.com]
Sent: Monday, February 09, 2015 12:44 PM
To: Troy Collison
Subject: Fwd: nervous level transducer at the WTP
From: "Keith Stiglbauer" <kstiglbauer@cityofmolalla.com>
To: "Jennifer Cline" <jcline@cityofmolalla.com>
Sent: Monday, February 9, 2015 12:38:17 PM
Subject: Re: nervous level transducer at the WTP
The Banner was installed to ease maintenance next time. Don't need to drain wet well to change or repair. By the way I still do not have any alarms?
From: "Jennifer Cline" <jcline@cityofmolalla.com>
To: "Keith Stiglbauer" <kstiglbauer@cityofmolalla.com>
Cc: "Jeff Mccrum" <jmccrum@cityofmolalla.com>
Sent: Friday, February 6, 2015 5:50:26 PM
Subject: Fwd: nervous level transducer at the WTP
Hi Keith,
Can you answer Tony's question for him please?
Thanks,
Jenn
Sent from my iPhone
Begin forwarded message:
From: Troy Collison <tbc@industrialsystems-inc.com>
To: Jennifer Cline <jcline@cityofmolalla.com>
Cc: "Keith Stiglbauer (kstiglbauer@cityofmolalla.com)" <kstiglbauer@cityofmolalla.com>
Subject: nervous level transducer at the WTP
Hi Jennifer
We were not able to get anyone to the WTP today to attempt to adjust the Banner Level sensor installed two months ago.
We have some signal filters being shipped 2nd day. Those should be here next Tuesday. When they arrive either John or I will go out to the WTP to install one and see what we can do with the settings on this unit to eliminate the unwanted signal fluctuations.
In the meantime, I have marked how I would set the selector switches up on this unit and scanned that document in and attached it. (see red marks on pages 2 and 3). This assume the device is intended to produce a 4-20mA signal.
Can I ask what this unit replaced and why? Was it a Miltronics Level sensor? Why was the banner unit installed?
Thank you,
Troy B. Collison
5835 NE 122nd Avenue, Suite #110
Portland, Oregon 97230
http://www.industrialsystems-inc.com
Phone: 503.262.0367
Cell: 360.957.5039
Fax: 503.262.0371
CCB # 196597 WA #INDUSSI880K9