From: Jennifer Cline
Sent: Wed Jul 15 16:31:32 2015
To: Rusty Pressnall
Cc: Jake Ehredt
Subject: RE: Molalla Force Main Repair
Importance: Normal
Attachments: IMG_3434.jpg; IMG_3435.jpg; IMG_3436.jpg; IMG_3437.jpg; IMG_3438.jpg; 20150715162723301.pdf; 20150715162829633.pdf; Hi Rusty, Jake is still working on getting the measurements from your email today. We should have those to you sometime tomorrow morning. Also I have included the Design Data information. It appears the other pipe used for this line is C-905. I also am sending the contract provisions for the HDPE. I hope this will provide enough information to determine the needed pressure rating. Regards, Jennifer Cline, P.E. City of Molalla Public Works Director O: 503.759.0218 F: 503.829.3676 From: Rusty Pressnall [mailto:rustyp@hdfowler.com] Sent: Wednesday, July 15, 2015 9:33 AM To: 'Jennifer Cline' Subject: RE: Molalla Force Main Repair Hi Jennifer, When your guys get the pipe between the 90 and the reducer exposed, we need to get an OD tape on both pipe sizes. I noticed the drawing says 24” DIPS which is fairly uncommon around here, usually we use IPS pipe. 24” DIPS is 25.80” OD, 24” IPS is 24.00” OD. 8” DIPS is 9.05” OD, 8” IPS is 8.625” OD. It’s important to verify what the pipe OD’s are and what the pressure rating needs to be so we can have everything built correctly. Thanks, Rusty Rusty Pressnall | Service Manager HD Fowler Company | Bellevue Branch Phone: (425) 748-5348 Fax: (425) 641-8885 | Cell: (425) 449-9701 From: Jennifer Cline [mailto:jcline@cityofmolalla.com] Sent: Tuesday, July 14, 2015 10:28 AM To: Rusty Pressnall Subject: Molalla Force Main Repair