From: Jennifer Cline
Sent: Tue Mar 03 09:17:20 2015
To: Erik Moorhouse
Subject: RE: FSM SCREEN PARTS PROPOSAL
Importance: Normal
Ok, well just do your best. If not, then that’s what I will take to council.
Question: Are the photos of the chain with gunk on it or can the chain be cleaned off?
Jennifer Cline, P.E.
City of Molalla
Public Works Director
O: 503.759.0218
F: 503.829.3676
From: Erik Moorhouse [mailto:emoorhouse@cityofmolalla.com]
Sent: Tuesday, March 03, 2015 9:06 AM
To: Jennifer Cline
Subject: RE: FSM SCREEN PARTS PROPOSAL
Jen,
Ill see what I can come up with. I believe this quote is from the manufacturer of the headworks. I am not sure if there are any other suppliers of these parts.
There is a 6 week lead time on these parts
Erik Moorhouse
City of Molalla
Asst. Wastewater Plant Operator
12424 S. Toliver rd
Molalla Or, 97038
503.829.5407 desk
503.888.6060 cell
From: Jennifer Cline [mailto:jcline@cityofmolalla.com]
Sent: Tuesday, March 03, 2015 8:31 AM
To: Erik Moorhouse; jclifford@cityofmolalla.com; jehredt@cityofmolalla.com; jpatrick@cityofmolalla.com
Cc: Heather Penni; Dan Huff
Subject: RE: FSM SCREEN PARTS PROPOSAL
Hi Erik
Because it is over $10K a will need approval from council. Also, we will need to try to get 3 quotes. If you request a quote by email, that will be documentation enough if they do not respond. I usually give 2-3 weeks for a response in my requests.
Keep moving forward with the repair, I will need to discuss with Heather if we have available funds this FY.
Jennifer Cline, P.E.
City of Molalla
Public Works Director
O: 503.759.0218
F: 503.829.3676
From: Erik Moorhouse [mailto:emoorhouse@cityofmolalla.com]
Sent: Tuesday, March 03, 2015 7:51 AM
To: Jennifer Cline; emoorhouse@cityofmolalla.com; jclifford@cityofmolalla.com; jehredt@cityofmolalla.com; jpatrick@cityofmolalla.com
Subject: FW: FSM SCREEN PARTS PROPOSAL
See attached for headworks proposal
Erik Moorhouse
City of Molalla
Asst. Wastewater Plant Operator
12424 S. Toliver rd
Molalla Or, 97038
503.829.5407 desk
503.888.6060 cell
From: Richard Howard [mailto:richard.howard@kusterszima.com]
Sent: Monday, February 23, 2015 1:17 PM
To: emoorhouse@cityofmolalla.com
Subject: FSM SCREEN PARTS PROPOSAL
Eric
Good Afternoon,
Sorry for the delay but I had to wait on Germany since this was built there and not here in South Carolina
Attached is your proposal for the Model 1000 screen at Molalla, Oregon
Let me know if you have any questions and what you’d like to do?
With kind regards
Richard Howard
Spare Parts Manager
Direct Line: (864)-594-5595
E-mail:richard.howard@kusterszima.com
Kusters Water
Waste-Tech, FSM, Hi-Tech, Hiller, Fuchs, CSO Technik and ACAT Products
a Division of Kusters Zima Corp
Tel: (864)-576-0660 x 1222
Fax Line (864)-587-5761
___ Sent via Scrollout F1