"file:///C:From: Jennifer Cline
Sent: Thu May 28 16:16:37 2015
To: dpearson@canbyherald.com
Cc: Dan Huff
Subject: RE: Asphalt
Importance: Normal
The total tonnage for the project is 3,742 tons @ $75 per ton equating to $280.6K
For typical roadway section that is 40-ft wide it would be approx.. $29.2K per mile.
Jennifer Cline, P.E.
City of Molalla
Public Works Director
O: 503.759.0218
F: 503.829.3676
From: dpearson@canbyherald.com [mailto:dpearson@canbyherald.com]
Sent: Thursday, May 28, 2015 4:03 PM
To: dhuff@cityofmolalla.com
Cc: jcline@cityofmolalla.com
Subject: RE: Asphalt
So, if I said “there are 5,345 tons in a typical roadway mile at a cost of $75 per ton,” that would be correct?
And is that really $75 or should it be $7,500 or even $75,000???
From: Dan Huff [mailto:dhuff@cityofmolalla.com]
Sent: Thursday, May 28, 2015 3:58 PM
To: Daniel Pearson
Subject: FW: Asphalt
Hope this helps
From: Jennifer Cline [mailto:jcline@cityofmolalla.com]
Sent: Thursday, May 28, 2015 3:58 PM
To: Dan Huff
Subject: RE: Asphalt
Depends on the thickness of the AC and width of the road. All vary on the project.
Typical section
(40’ wide)*(4” Thick)* 1mi(5280’/mi) = 70,400 cf/(27cf/cy) = 2,607 cy * 2.05 Ton/cy = 5,345 Tons in a typical roadway section for 1mile
Stowers, Grange & Heintz, plus additional patch work = 280,663 tons @ $75,00
Jennifer Cline, P.E.
City of Molalla
Public Works Director
O: 503.759.0218
F: 503.829.3676
From: Dan Huff [mailto:dhuff@cityofmolalla.com]
Sent: Thursday, May 28, 2015 3:50 PM
To: Jennifer Cline
Subject: FW: Asphalt
See?
From: dpearson@canbyherald.com [mailto:dpearson@canbyherald.com]
Sent: Thursday, May 28, 2015 3:49 PM
Subject: RE: Asphalt
Thanks, Dan. So, how many tons in 1/10th Of a mile?
Daniel
From: Dan Huff [mailto:dhuff@cityofmolalla.com]
Sent: Thursday, May 28, 2015 3:41 PM
To: Daniel Pearson
Subject: Asphalt
$75 per ton. Price associated with our recently completed projects.