From: Jennifer Cline
Sent: Tue Sep 23 15:18:56 2014
To: Garrett Edmunds
Subject: FW: Molalla RediMix 13050 S. Hwy 211
Importance: Normal
Attachments: MX-3100N_20140918_183457.pdf; From: Mike Penunuri [mailto:penunuri@molallafire.org] Sent: Thursday, September 18, 2014 6:09 PM To: Jennifer Cline Subject: RE: Molalla RediMix 13050 S. Hwy 211 Attached is the map with the way I tested the hydrants. There one is off of Ona Way/Molalla Forest. This is the one I took the static and residual pressures from. The other is at the rear Molalla RediMix’s property. This is the one I used for the Pitot reading. I hope that this helps. Mike From: Jennifer Cline [mailto:jcline@cityofmolalla.com] Sent: Thursday, September 18, 2014 8:21 AM To: Mike Penunuri Subject: RE: Molalla RediMix 13050 S. Hwy 211 Hi Mike, Just a clarification on the flow test. Did you test the hydrant on the 8” line at Sta. 7+19 or the hydrant on the 6” line at Sta. 10+00? I’m not certain that would make a difference since the 8” doesn’t continue west beyond the hydrant at staion 7+19. Thanks for your help and I will forward on your comments. Jenn From: Mike Penunuri [mailto:penunuri@molallafire.org] Sent: Wednesday, September 17, 2014 2:14 PM To: 'Jennifer Cline' Cc: Vince Stafford Subject: Molalla RediMix 13050 S. Hwy 211 Jennifer, Attached is the hydrant flow calculations for the hydrant that resides at the rear of Molalla Redi-Mix. The Other hydrant that was used in the test is off of the Molalla Forest road directly behind the Molalla Redi-Mix property. After reviewing the plans that you sent yesterday, my comments are as below. 1) The hydrant detail needs to reflect 4” stortz connections being added to the steamer port of the hydrant. Please add this note and re-submit. 2) The detail does not show impact protection. Please add impact protection detail and re-submit for review. 3) This will be a dead end hydrant line. It has been practice in the past not to allow dead end lines as it affects the flow rates if more than one hydrant has to be used. This line needs to be looped back in to the water system. 4) Will this be a private or public hydrant? If it is a private hydrant, provisions need to be made prior to installation to assure that repairs will be done in a timely manner if this hydrant becomes damaged. This has been an issue in the past with private hydrants. 5) The addition of this one hydrant does not meet the requirements of the Oregon Fire Code Appendix “D” for spacing in this complex. If any further development is done on this property, additional fire hydrants will required in order to bring this site in line with past and current codes. Michael C. Penunuri Lieutenant/Paramedic ICC Inspector II N.F.P.A. Inspector III 503-829-2200 Ext 104 Fax 503-829-5794 This message is confidential. It may also be privileged or otherwise protected by work product immunity or other legal rules. If you have received it by mistake, please let us know by e-mail reply and delete it from your system; you may not copy this message or disclose its contents to anyone. Please send us by fax any message containing deadlines as incoming e-mails are not screened for response deadlines.