From: Ben Dye
Sent: Fri Dec 14 15:49:57 2018
To: Andy Peters
Cc: Dan Huff; Gerald Fisher; Adam Shultz
Subject: Re: WO#4560 [Utility_Crew]:
Importance: Normal
Microsoft Exchange Server;converted from html;
Hi Peter,
I have the drill, could use you truck generator is that is available. there are four bolts for each sculpture. I can set the art with the lift gate in my truck. can we look at next Wednesday morning for install at the library location?
-----Original Message-----
From: Andy Peters
To: bdyef@aol.com
Cc: Dan Huff ; Gerald Fisher ; Adam Shultz
Sent: Fri, Dec 14, 2018 1:56 pm
Subject: WO#4560 [Utility_Crew]:
Good Afternoon Mr. Dye,
We’ll be contacting you by email shortly to set up a time to meet and understand what’s needed from the City for the art work. We are tracking the situation on the work order below. Let me know if I have this right or am missing an important anything I should know? If you have any questions or concerns throughout the process feel free to contact me.
Respectfully,
Andy Peters
City of Molalla
Public Works Operations Supervisor
(503) 829-6855 x220
Cell: 503-793-0507
117 N Molalla Ave
Molalla, OR 97038
From: MolallaOps@CityOfMolalla.com
Sent: Friday, December 14, 2018 1:51 PM
To: Andy Peters ; Andy Peters
Subject: New WO#4560 [Utility_Crew]: There is a man named Ben
NEW WO#4560 [Utility_Crew]: requested by apeters. Promise Date: 12/19/2018 12:00:00 AM
There is a man named Ben Dye (bdyef@aol.com) who has made some Native American themed art work for the City. We have agreed to help with installing these. This may mean a few small concrete pads, or red-heading bolts in certain sidewalks. Please begin by confirming with Ben where they are going (in the field), and verify anything else we need to know to get the job done, then get some good work orders in place to guide and document our efforts and any specifics Ben tells us.
There is a drawing provided to me by Dan Huff on the kind of small concrete structure they are asking for, but be careful about viewing this as an "engineering" drawing. Verify the requirements. We may need to do a shop drawing of our own.
Note for red-head bolts the artists says the following: "I like to use Titen bolts by simpson. They carry them at Canby builder's supply. I have drilled 1/2" holes , so get 1/2'' by 6''
"
You are receiving this message because your email address is coded into MolallaOps web.config file, or public enum, to notify on new. If you feel you've received this email in error please contact Molalla Operations or City Hall: (503) 829-6855.