From: Gerald Fisher

Sent: Tue Feb 07 17:48:10 2017

To: RAY BELL

Cc: Mike Penunuri

Subject: RE: water meter

Importance: Normal

Hi Ray,

The meter size is ¾” unless the fixture units warrant more. The plumber will have to supply me with the calculations for an upsizing to a 1” meter and there is an impact to system development charges. The water service size can be 1” which is usually enough to serve a duplex. That may change if sprinklers are required.

For water pressures and flow rates they can contact Mike Penunuri of the Fire District. He has the latest test information for that area. I have included him in this email so you can get the info you need. Thanks and have a good evening.

Regards,

Gerald Fisher, P.E. | Public Works Director

City of Molalla

117 N Molalla Ave. | PO Box 248 |Molalla, OR 97038

Office: 503.829.6855 | Direct: 503.759.0218

CONFIDENTIALITY NOTICE: The information contained in this email message, including any attachments, is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient and have received this communication in error, please contact the sender by reply email and destroy all copies of the original message. Thank you.

From: RAY BELL [mailto:bellsconstruction@msn.com]

Sent: Tuesday, February 07, 2017 5:27 PM

To: Gerald Fisher <gfisher@cityofmolalla.com>

Subject: water meter

my plumber is attempting to size the water line needed from meter to building to service the new duplex we are building at 713 e. main street. he is asking for the meter size and pressure? if you're not the person to be asking this can you direct me to who could? thanks you. ray 503-313-9228