ISSUED TO:

<Company Legal Name>

<Mailing Address>

<City, State, Zip>

INFORMATION RELIED UPON:

Application No.:  0     

Date Received:  <mm/dd/yy>

PLANT SITE LOCATION:

<Street Address>

<City, County, Zip Code>

LAND USE COMPATABILITY STATEMENT:

Approving Authority:  <Name>

Approval Date:  <mm/dd/yy>

PERMIT PREVIOUSLY ISSUED TO:

<Company legal name>

Table 1 Code

Source Description

SIC

Part A, 5

Prepared feeds for animals and fowl and associated grain elevators more than 1,000 but less than 10,000 tons per year throughput

2048

1.1  1

Permitted Activities

The permittee is allowed to discharge air contaminants from processes and activities related to the air contaminant source(s) listed on the first page of this permit until this permit expires, is modified, revoked or rescinded as long as the permittee complies with the conditions of this permit.

2.1  Production limits

The permittee is prohibited from processing 10,000 or more tons of prepared feed without first applying for and being assigned to General Air Contaminant Discharge Permit AQGP-014.

2.2  Visible emission limits

Emissions from any air contaminant source must not equal or exceed 20% opacity as a six-minute block average. “Opacity" means the degree to which an emission reduces transmission of light and obscures the view of an object in the background.

2.3  Fugitive Emissions

The permittee must take reasonable precautions for preventing fugitive dust emissions. Reasonable precautions include, but are not limited to:

a.  Treating vehicular traffic areas of the plant site under the control of the permittee;

b.  Operating all air contaminant generating processes so that fugitive type dust associated with the operation will be adequately controlled at all times; and

c.  Storing materials collected from air pollution control equipment in a covered container or other method equally effective in preventing the material from becoming airborne during storage and transfer.

2.4  

d.  Prompt removal of “tracked-out” material from paved streets.

2.5  

e.  While operating in the Medford/Ashland AQMA and the Lakeview Urban Growth Area, the permittee must prepare and implement a site-specific Fugitive Emission Control Plan and an Operation and Maintenance Plan.

2.6  Particulate Matter Fallout

The permittee must not cause or permit the emission of any particulate matter larger than 250 microns in size at sufficient duration or quantity, as to create an observable deposition upon the real property of another person.

2.7  Nuisance and Odors

The permittee must not cause or allow air contaminants from any source to cause a nuisance. Nuisance conditions will be verified by DEQ personnel.

2.8  Other Regulations

In addition to the specific requirements listed in this permit, the permittee must comply with all other legal requirements enforceable by DEQ.

3.1  Records

The permittee must maintain records of the information identified in Condition 3.2 for at least five years from the date of the record.

3.2  Reports

The permittee is required to report to DEQ by February 15^th of each year the tons of feed processed during the previous calendar year.

3.3  Permit Renewal

An application to renew the permit is due <date>.

3.4  Construction or Modification Notices

The permittee must notify DEQ before adding new or modifying existing equipment to the extent that process equipment is substantially changed or added to, or emissions are significantly changed or increased.

3.5  Notice of Change of Ownership or Company Name

The permittee must promptly notify DEQ of any change of mailing address, company name, or plant ownership. The permit will expire 60 days after a change in the legal entity owning/operating the facility unless application, with appropriate fees, is made to transfer the permit to the new entity.

3.6  Where to Send Reports and Notices

The reports and notices, with the permit number prominently displayed, must be sent to the regional office identified on the cover page of the permit.

4.1  Fees

The Annual Fee specified in OAR 340-216-8020, Table 2, Part 2 for a Basic ACDP is due on December 1 of each year this permit is in effect. An invoice indicating the amount, as determined by DEQ regulations, will be mailed prior to the above date.

5.1  Masking of Emissions

The permittee must not cause or permit the installation of any device or use any means designed to mask the emissions of an air contaminant that causes or is likely to cause detriment to health, safety, or welfare of any person or otherwise violate any other regulation or requirement.

5.2  Open Burning

The permittee may not conduct any open burning except when approved by DEQ in advance.

5.3  Asbestos

All activities involving asbestos-containing materials, including, but not limited to, demolition, renovation, repair, construction, and maintenance must be performed by persons certified for asbestos abatement projects. Accumulation of asbestos containing material is prohibited. If you have asbestos questions, contact the regional DEQ office identified below.

5.4  Permit Availability

The permittee must have a copy of the permit available at all times.

5.5  DEQ Inspections

The permittee must allow DEQ’s representatives access to the plant site and pertinent records at all reasonable times for the purposes of performing inspections, surveys, collecting samples, obtaining data, reviewing and copying air contaminant emissions discharge records and conducting all necessary functions related to this permit.

5.6  Legal Disclaimers

The issuance of this permit does not convey any property rights in either real or personal property, or any exclusive privileges, nor does it authorize any injury to private property or any invasion of personal rights, nor any infringement of federal, state, or local laws or regulations.

5.7  Permit Revocation

This permit is subject to revocation for cause.

5.8  DEQ Contact

Call the Air Quality Section of the regional office in at .