Department of Environmental Quality

Air Quality Program

BASIC

AIR CONTAMINANT DISCHARGE PERMIT

REVIEW REPORT

<Facility Name >

<Site Address>

<City, OR, zip

<Telephone No.>

1.  The proposed permit is a new permit for source.

2.  The proposed permit is a for an existing Air Contaminant Discharge Permit (ACDP) which was issued on <enter date> and was originally scheduled to expire on <enter date>. The old ACDP is being converted to a Basic ACDP in accordance with the rules adopted in May 2001.

3.  The permittee operates a <Enter facility type here>. The facility was built in <Enter date here>. A description of the processes, equipment, and activities is provided in the attached application.

4.  This facility qualifies for a Basic ACDP because the production will be less than <enter production level from Table 1, Part A> per year.

5.  The source is located in an attainment area for <list pollutants>, a maintenance area for <list pollutants>, and a nonattainment area for <list pollutants>. The source located within 10 kilometers of the <list the Class I area> Class I Air Quality Protection Area but the emissions are less than the significant emissions rate.

6.  The Department has determined that sources that qualify for a Basic ACDP will not have significant emissions. In most cases the emission will not exceed 5 tons of PM or PM₁₀ or 10 tons of any other pollutant. Therefore, the Basic ACDP does not include Plant Site Emission Limits and it is not necessary to estimate emissions for each individual source.

7.  Pursuant to OAR 340-216-0056(4), issuance of a new or renewed Basic Air Contaminant Discharge Permit requires public notice in accordance with OAR 340-209-0030(3)(a). Therefore, there will be no prior notice or public participation. However, the Department

8.  will maintain a list of all permit actions processed under Category I and make the list available for public review.

j:xxx

Document3

Oct 8, 2025

Permit Template Coordinator, 2011-06-01T09:27:00Z

Go through document using tab key. Fill in form fields. Some are drop down boxes. Others fill-in fields. To unprotect document click Office button in upper left corner. Select "Word Options," then "Customize." In dropdown menu on left, select "All Commands," then "LOCK" in alpha list and add to quick command list. Click OK. Little lock will appear along top of doc. Protect and unprotect by clicking lock icon.

Permit Template Coordinator, 2011-06-01T09:20:00Z
Page: 1
With document unprotected, double click header section to type in the Permit No. and application number. While in Header section highlight # of pages field and click icon in header toolbar to recalculate # of pages.

Permit Template Coordinator,
Use this for new permits.

Permit Template Coordinator,
Use this for permit renewals.

Permit Template Coordinator, 2011-06-01T09:27:00Z

Include sentence if new or modified source is located within 10 kilometers of Class I area. Additional analysis required to determine if new or modified source has emissions greater than SER. Refer to definition of Significant Emissions Rate in rules (OAR 340-200-0020).

Permit Template Coordinator, 2011-06-01T09:22:00Z

Refer to OAR 340-200-0020 for determining SER when source within 10 km of Class I area.

Permit Template Coordinator, 2011-06-01T09:22:00Z

Enter permit writer initials followed by reviewer initials